Door Reversal - Russell Hobbs RHUCLF55(B) Instruction Manual

Door Reversal

You will need to tilt the fridge backward to access the lower hinge which holds screws. Do
not tilt more than 45 degrees and do not lay the fridge flat on its side.
For your own safety, a minimum of 2 people should lift or tilt this product.
Reversing the door:
1. Remove the two screws from the right hand bottom hinge, either with a Phillips head
screwdriver or a spanner.
2. Support the door and gently remove the hinge.
3. Remove the door and place it on a cushioned surface.
4. Remove the upper hinge pin from the top right hand corner of the main body.
5. Fix the same upper hinge pin to the top left hand side of the fridge.
6. Remove the cap on the door from the top left hand side and put it in the hole where
the hinge pin was previously on the right hand side.
7. Swap the bottom door stopper over to the opposite side.
8. Position the door in the top hinge pin.
9. Align the door in the closed position. Place the lower hinge in position and secure the
two screws, that secured it on the right hand side.
Check that the door opens and shuts correctly after you have completed the door reversal
The appliance must now be upright for a minimum of 2 hours before turning it on.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
Door reversal
process.
www.productcareuk.com
6