Touch Sensor Tone; Manual Clock Adjustment; Si (System Indicator) - Kenwood DNR-1000U Instruction Manual

In Standby mode

Touch Sensor Tone

Setting the operation check sound (beep sound)
ON/OFF.
Display Setting
"BEEP ON" Beep is heard.
"BEEP OFF" Beep canceled.
In Standby mode

Manual Clock Adjustment

1
Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM].
Select the "CLK ADJ" display.
2
Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3
Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards [4] or [¢].
4
Exit Clock adjustment mode
Press the [MENU] button.
In Standby mode

SI (System Indicator)

The red indicator blinks when the ignition key of
the vehicle is at the OFF position.
Display Setting
"SI ON" LED flashes.
"SI OFF" LED OFF.
|
English
17