Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KAM KMD20
Summary of Contents for KAM KMD20
-
Page 2: Safety Information
Safety Information CAUTION: To reduce the risk of electric shock, do not remove any cover(or the rear section). No user serviceable parts inside. Refer servicing to qualified service personnel only. WARNING: To reduce of fire or electric shock, do not expose this appliance to rain and moisture. Electrical equipments should NEVER be kept or stored in damp environments. - Page 3 Ventilation The appliance should be situated so that it’s location or position does not interfere with it’s proper ventilation. For example, the appliance should not be situated on a sofa, bed, or similar surface that may block the ventilation opening; or keep the appliance away of those objects such as newspapers, carpet which may cover the ventilation opening or impede the flow of air through the ventilation opening.
- Page 4 A: Channel section: All channels of powered mixers & mixing consoles are the same. (1)MICROPHONE Electronically Microphone inputs accept a standard XLR male connector. (MONO CHANNEL) 1.GROUND=shield, 2.HOT=signal input, 3.COLD=ground(shield). You can use max -60dB~ -10dB according to signal level by GAIN control. (2)LINE INPUT Using by1/4"standard...
-
Page 5: B: Master Section
(16), (17),STEREO RECORDER &PHONO JACK (16), these jacks can be connected with cassette cleek. When playing backrecorded. (17), these jack are can be connected with cassette cleek. When recording the MIXED output. (18), (19), (22), (23) LINE IN (18) line in for channel 7/8 (19) line in for channel 9/10. - Page 6 (33)DIGITAL EFFECTS PROCESSOR 99 Effects (details attached) 01 – 08 Reverb Hall 09 – 14 Reverb Room 15 – 20 Reverb Plate 21 – 25 Ambient 26 – 31 Gated Reverb 32 – 37 Reverse Reverb 38 – 45 Echo & Room/Hall 46 –...
-
Page 7: Channel Inserts
C: Real panel (59) CHANNEL INSERTS Pre-fader/pre-EQ tip=send/Ring=return (60)ALT3-4 INSERTS (61) ALT 3-4 OUTPUTS (62) MAIN INSERTS (63) MAIN OUTPUTS(UNBALANCED) (64) MAIN OUTPUTS(BALANCED) (65)BALANCED MAIN OUTPUT LEVEL SWITCHES Via the switches, you can choose between the two different operating level settings-10dBV and +4dBU. (66) PHANTOM POWER When you push the switch, all MIC outputs have +48V phantom power present. - Page 9 F:ACE99's EFFECT CHART:...
Need help?
Do you have a question about the KMD20 and is the answer not in the manual?
Questions and answers