Optus ADSL2+ WIFI MODEM Manual To Installing page 6

START 'ER UP!
STEP 3
1. Open up your web browser and head to 192.168.0.1
2. Log in with your personal OptusNet email and password which you'll find in
3. If you've lost your password, give us a shout on 1300 739 407
4. It could take a few minutes (up to 30 minutes), but you're now connected.
Heads-up: If you incorrectly enter your username and password you'll
be sent to our ServiceNet page. Don't worry, just enter your details and
follow the prompts to get connected.
5. Last, check that the power light and DSL lights on your modem are on but
the welcome letter we sent you. Hit 'apply'. If you enter the wrong username
and password by any chance, it's OK. You'll be swiftly transferred to our
ServiceNet page, where you just enter your details and follow the prompts.
To confirm, go back to 192.168.0.1 and you should see the screen below.
http://192.168.0.1
@
Connected to ADSL2 +
Welcome to ServiceNet
Important! Instead of the Internet you have been connected to a restricted Optus Internet online system called ServiceNet.
Please enter your Optus Dial Internet username and password below so we can give you further information about why you have been connected to this system.
NOTE: You will not be able to access the Internet or retrieve email during this session. Login above for details.
Optus Dial Internet Customer Service is available 24 hours a day, 7 days a week on 1300 301 325.
Your IP address is: 203.13.128.104
Next >>
not flashing. The internet light should be flashing. All's well with the world.
POWER & DSL
LIGHTS
(Not flashing)
Username: @optusnet.com.au
Password:
INTERNET
LIGHT
(Flashing)
Heads-up: We recommend you
don't use the phone ports on
your new ADSL2 + modem.