Adjusting The Picture Quality - Kenwood DV-6050 Instruction Manual

Adjusting the picture quality

Use the following procedure to adjust the picture quality.
(If the desired picture quality cannot be obtained by the
following operation, adjust it on the TV.)
COMPONENT VIDEO OUTPUT switch : The setting
items vary depending on the position of the COM-
PONENT VIDEO OUTPUT switch on the rear of the
player. @
When "Interlace" is set
1.
Press the ON SCREEN button during playback, then
display the "VISUAL" OSD by pressing the cursor up/
down button.
Interlace
2.
Move the cursor to
Normal
adjustment icon) by pressing the cursor left/right
button, then press the ENTER button.
3.
Select one of the following picture quality settings by
pressing the cursor up/down button, then press the
ENTER button.
"Normal": Normal picture quality.
Noise Reduction
"Fine": Sharp picture quality with
Normal
enhanced contours.
Fine
"Soft": Soft picture quality with less
Soft
noise.
Cinema
"Cinema": Picture quality close to
the images on the movie theater
screen.
When "User Mode 1" or "User
Noise Reduction
Mode 2" is selected, more detailed
User Mode 1
User Mode 2 setting is available. In this case, also
perform the operation in step 4.
38
4.
Select a setting item by pressing the cursor up/down
button, then press the ENTER button.
User Mode 1
Contrast
Color
Sharpness
Brightness
(Picture quality
User Mode 1
GAMMA
5.
Select a value by pressing the cursor up/down but-
ton, then press the ENTER button.
¶ The picture quality varies according to the selected
value. Set the desired picture quality by repeating
steps 4 and 5.
"Contrast": Adjustment of the
difference between the bright and
0 dark parts of picture in the range
0 between -7 and +7.
0 "Color" : Adjustment of the depth
0 of colors in the range between -7
and +7.
"Sharpness": Adjustment of the
degree of picture contour
enhancement in the range
between -2 and +2.
"Brightness": La luminosité de
l'image peut être réglée entre 0 et
+15.
The following setting items are
provided on the next page.
0
"GAMMA": Le gamma du moniteur
peut être réglé entre -7 et +7.
Chapter 4: OSD Operation
When "Progressive" is set
1.
Press the ON SCREEN button during playback, then
display the "VISUAL" OSD by pressing the cursor up/
down button.
Progressive
2.
Move the cursor to
Normal
adjustment icon) by pressing the cursor left/right
button, then press the ENTER button.
3.
Select a setting item by pressing the cursor up/down
button, then press the ENTER button.
"Normal": Normal picture quality.
Noise Reduction
When "User Mode 1" or "User
Normal
Mode 2" is selected, more detailed
User Mode 1
setting is available. In this case, also
User Mode 2
perform the operation in step 4.
4.
Select a setting item by pressing the cursor up/down
button, then press the ENTER button.
"Sharpness": Adjustment of the
User Mode 1
degree of picture contour
Sharpness 0
enhancement in the range
GAMMA between -2 and +2.
0
"GAMMA": Adjustment according to
I / P
Auto
the gamma curve of the monitor,
DCDi
Off
in the range between -7 and +7.
"I/P": If the disc is changed in the
middle of programming, the
playback may become different
from the intended playback.
"DCDi": Minimizes jaggies on angled
lines.
5.
Select a value by pressing the cursor up/down but-
ton, then press the ENTER button.
¶ The picture quality varies according to the selected
value. Set the desired picture quality by repeating
steps 4 and 5.
(Picture quality