Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. DVF-3530 / DV-402 CLASS 1 LASER PRODUCT...
Page 3
Introduction DVF-3530 / DV-402 Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Caution : Read this page carefully to ensure safe operation. DVF-3530 / DV-402...
1. Item 3 is not required except for grounded or polarized equipment. 2. Item 17 and 18 are not required except for units provided with antenna terminals. 3. Item 17 complies with UL in the U.S.A. IMPORTANT SAFEGUARDS DVF-3530 / DV-402...
Dynamic Range ... 34 Digital Audio Out ... 34 Knowledge ... 35 DVD menu language code list ... 35 DIMMER function ... 35 In case of difficulty ... 36 Specifications ... 38 DVF-3530 / DV-402 carefully to ensure safe operation. Operation Knowledge...
÷ CDV discs (Only the audio part can be reproduced.) ÷ CD-G/CD-EG/CD-EXTRA discs (Only the audio can be reproduced.) ÷ CD-R/CD-RW discs (Never attempt to play them.) ÷ Photo CD discs (Never attempt to play them.) Description DVF-3530 / DV-402 12cm One side only Max. 74 min., digital...
(as shown on the right). This is be- cause the disc has been recorded in the PAL format. The screen may be somewhat hard to see but this is not malfunction. DVF-3530 / DV-402...
District 2-2 District 2-3 District 3 Japan Middle East Southeast Asia DVF-3530 / DV-402 Major Countries & Areas Japan, Taiwan, Korea, U.S.A., Canada, Mexico, Philippines, Chile, etc. China, North Korea, U.K., Germany, Australia, New Zealand, Kuwait, Singapore, etc. District 4-1...
Be especially careful in the following conditions: When the unit is brought into a place where there is a large difference in temperature between the previous location, when the humidity of the listening room is high, etc. DVF-3530 / DV-402...
AUDIO OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL Audio cord S-video cord DVF-3530 / DV-402 Malfunction of microcomputer If operation is not possible or erroneous dis- play appears even though all connections have been made properly, reset the micro- computer referring to “In case of difficulty”.
VIDEO OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL S-VIDEO DVF-3530 Remove protective cap be- fore connecting DVF-3530 DIGITAL OUTPUT AUDIO OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL Coaxial or Optical cable Audio cord Video code or S-video cord DVF-3530 / DV-402 VIDEO OUTPUT S-VIDEO...
Top panel : 50 cm Side panel : 10 cm Connecting to a TV with video (composite) input terminal Connecting to a TV with S-video input terminal Back panel : 10 cm DV-402 or DVF-3530 DIGITAL OUTPUT AUDIO OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL...
Connecting to a TV with Component input terminals Audio cord Video cords Connecting to an Audio component AV receiver or Amplifier System Connections (for Other countries) DV-402 or DVF-3530 VIDEO OUTPUT DIGITAL OUTPUT AUDIO OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL S-VIDEO...
RESUME function. When the STOP key is pressed again during stop, the RESUME function is can- celled. RESUME is cancelled when 5 minutes have passed in RESUME status. DVF-3530 / DV-402 6 (PLAY/PAUSE) key POWER 0 (open/close) key 7 (STOP) key...
If one of the icons is “grayed out,” the banner display feature isn’t available for the disc you’re playing. Press the ON SCREEN key or CLEAR key CLEAR DVF-3530 / DV-402 SUBTITLES BOOKMARKS AUDIO ANGLES...
0 first and the other value. Then play starts. This varies depending on number of chapter or track within the disc you’re playing. Note Note The Chapter feature won’t work if the disc isn’t formatted with separate chapters DVF-3530 / DV-402 the ON ON SCREEN...
Notes 2. When you chose an audio language from the Banner Display, you only override the audio language setting in the DVD Player’s main menu (in the Language Prefer- ences menu within Setup menu) temporarily. Using the On-screen banner display Changing the Subtitle Language You can change the Subtitle language while you’re...
÷ After Intro Scan goes through all of the tracks, it stops. ÷ If you want to stop IntroScan while it’s in progress, just press PLAY (3) key on the remote (the current track starts playing in its entirety). DVF-3530 / DV-402 ON SCREEN...
(sound) as the beginning point. The Repeat A- display appears LED display 3 Press the A-B key again to choose a scene (sound) as the end point. The Repeat A-B display appears LED display DVF-3530 / DV-402...
The Standard Play display appears when random is off. ÷ The menu is switched off when no operation is performed for about 3 seconds. When playing a DVD, the Random function Note Note may not work. Using the On-screen banner display DVF-3530 / DV-402...
÷ While a disc is playing, press P.MODE key on the remote to start Program play ÷ To return to standard play, press the P.MODE key again. PROGRAM EDIT Title Chapter Derete Play (12) Done DVF-3530 / DV-402 Playlist Playlist Playlist...
Page 27
2. When you turn power off and on. Program edit display appears. PROGRAM EDIT Title Chapter Insert Derete Play (12) Done (An example of DVD program edit menu) PROGRAM EDIT Title Chapter Insert Derete Play (12) Done Program play DVF-3530 / DV-402 Playlist Playlist...
4 x 3 letterbox 4 x 3 Pan Scan 16 x 9 Widescreen : Choose this setting if your DVD player is connected to a widescreen Dynamic Range : This is set to ON when the volume change should not become overly large, for example when listening late at night.
2 Input code in the first digit by 3 Select “OK” icon and press fi) ÷ Press PLAY key to resume normal playback. Set Up functions DVF-3530 / DV-402 (Subtitle menu appears.) TER key Press Cursor up/down (5/∞) keys or numeric keys on the remote and repeat other 3 code with same way.
America rates movies as G, PG, PG-13, etc.). (Menus appears.) ÷ Press PLAY key to resume normal playback. Set Up functions DVF-3530 / DV-402 1 Press Cursor up/down (5/∞) keys on the remote to select Menus on the set up menu display, then press the ENTER key.
5 Press Cursor up/down (5/∞) keys or numeric keys on the remote to enter again password that you entered, then press the ENTER key. 6 Select OK and press the ENTER key. ÷ Press PLAY key to resume normal playback. DVF-3530 / DV-402...
Page 32
3 Press Cursor up/down (5/∞) keys to select Change Password, then press ENTER key. Set Up functions DVF-3530 / DV-402 4 Press Cursor up/down (5/∞) keys or numeric keys on the remote to enter password. 5 Press ENTER key to finish pass-...
ENTER key. (TV Aspect menu appears.) 2 Press Cursor up/down (5/∞) keys on the remote to select TV Aspect menu, then press the ENTER key. ÷ Press PLAY key to resume normal playback. Set Up functions DVF-3530 / DV-402...
DVD player is connected to an amplifica- tion system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.
÷ You are attempting to switch the angle in a DVD section where more than one angle is not re- corded. DVF-3530 / DV-402 Remedy ÷ Load a disc and press the play (3) key. ÷ Turn the disc over and properly place it on the disc tray.
1997 Dolby Laboratories. All rights reserved. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. In case of difficulty DVF-3530 / DV-402 Remedy ÷ Check the viewing restriction level (RATING) setting. ÷ Set the initial setup to the factory setup with the following procedure.
Channel separation ... More than 95 dB (1 kHz,) Wow and flutter ... Below measurable limit Analog output level/impedance ... 2 V / 1 k Digital output level/impedance KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. Notes Notes Notes ÷...
Page 40
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.