Hookups - Sony DVP-NS715P Service Manual

QQ
3 7 63 1515 0

Hookups

Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, disconnect the power cords, check that you have all of the supplied accessories,
and insert the batteries into the remote (page 15).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
A
Audio/video
INPUT (yellow)
cord
VIDEO
(supplied)
L
AUDIO
R
TV, projector or AV
amplifier (receiver)
(yellow)
to LINE OUT (VIDEO)1 or 2
DIGITAL OUT LINE OUT S VIDEO COMPONENT VIDEO OUT
OUT
COAXIAL OPTICAL
AUDIO VIDEO Y SELECTABLE
PCM/DTS/DOLBY DIGITAL R L
INTERLACE
1 1 P B
PROGRESSIVE
2 2 P
R
SCAN SELECT
to S VIDEO OUT 1 or 2
TE
L 13942296513
l : Signal flow
18
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
A
Components to be connected
TV
• Surround effects: TVS DYNAMIC (page 50),
TVS WIDE (page 50)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 50)
or
MD deck/DAT deck
• Surround effects: none
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 73)
AV amplifier (receiver) with a digital input jack
having a Dolby Digital or DTS** decoder and 6
speakers
• Surround effects: Dolby Digital (5.1ch) (page 73),
DTS (5.1ch) (page 73)
www
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks
.
of Digital Theater Systems, Inc.
20
http://www.xiaoyu163.com
C
Component
COMPONENT
video cord VIDEO IN
(not supplied)
Y
(green)
P
B
(blue)
P
R
(red)
TV, projector or AV
amplifier (receiver)
(green) (blue) (red)
to COMPONENT
VIDEO OUT
CD/DVD player
INPUT
S VIDEO
S VIDEO cord
B
TV, projector or AV
(not supplied)
amplifier (receiver)
through .
D
Connection Your setup
(page 21) example
A
(page 22) example
B
(page 23) example
C
(page 24) example
D
x ao
y
i
http://www.xiaoyu163.com
8
A If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are
connecting to a TV only.)
B If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images. If your TV accepts progressive
(480p) format signals, you must use this connection and set "COMPONENT OUT" to
"PROGRESSIVE" in "SCREEN SETUP" (page 65).
Green
Blue
Red
Notes
• Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear
image on the TV screen.
CD/DVD player
• Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In the case of 480 progressive scan picture problems, it
is recommended that you switch the connection to the standard definition output. If there are questions
regarding your Sony TV set's compatibility with this model 480p DVD player, please contact our customer
service center.
Q Q
3 6 7 1 3
A Connecting to your TV
This connection will use your TV speakers for sound.
CD/DVD player
DIGITAL OUT LINE OUT S VIDEO COMPONENT VIDEO OUT
OUT
COAXIAL OPTICAL AUDIO VIDEO Y
PCM/DTS/DOLBY DIGITAL R L
1 1 P
B
2 2 P R
A
LINE OUT
(yellow)*
AUDIO VIDEO
R L
1
(white)
2
(red)
to LINE OUT L/R
(AUDIO) 1 or 2
l : Signal flow
* The yellow plug is used for video signals (page
18).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) 1/2 jacks to the TV's
audio input jack.
u163
.
1-4
2 9 9 4 2 8
Yellow (Video)
White (L)
Red (R)
, P )
B R
Green
Blue
Red
VCR
TV
Connect
directly
1 5 0 5 8 2 9 9 4
SELECTABLE
INTERLACE
PROGRESSIVE
SCAN SELECT
TV
(yellow)
(white)
(red)
Audio/video
cord (supplied)
to audio input
m
co
,continued
9 9
2 8 9 9
19
21