Table of Contents
Advertisement
On Screen Control
D
A
B
When the current setting information is displayed on the screen, touching a dotted line will enable
operation of each of the following items:
• If R-Cam is selected when Mirror is set to ON for AV-IN2 (mentioned in <System Setup> (page 9)), On-screen settings
are not displayed.
Switching the TV/Video Screen Mode
Touch the A area.
When buttons are displayed, touching the A area
switches the Screen mode as follows:
Display
Setting
"Full"
Full screen mode
"Just"
Just screen mode
"Zoom"
Zoom screen mode
"Normal"
Normal screen mode
• You cannot operate when the navigation picture is
displayed.
Switching the Speaker Mode
Touch the B area.
When buttons are displayed, touching the B area
switches the built-in speaker mode as follows:
Display
Setting
"Normal"
Sound with monitor picture
"TV"
Sound of televion (During the
KTC-V500N, KTC-V500P or KTC-
V500E is connected)
"NAV"
Sound of navigation
"Video1"
Sound of video 1
"Video2"/
Sound of video 2
"R-Cam"
"Off"
Built-in speaker is turned off
C
Switching the AV Output
Touch the C area.
When buttons are displayed, touching the C area
switches the AV output mode as follows:
Display
"Normal"
"TV"
"Video1"/
"NAV"
"Video2"/
"R-Cam"
Exit the On Screen Mode
Touch the D area.
• If you make no operation for 5 seconds, the On screen
control mode is automatically canceled.
Monitor Control Function
Setting
Picture/sound with monitor
picture
Picture/sound of the television
(During the KTC-V500N,
KTC-V500P or KTC-V500E is
connected)
Picture/sound input from the
AV-IN 1 terminal
Picture/sound input from the
AV-IN 2 terminal
English
7
|
Advertisement
Table of Contents
