Sharp Aquos LC-57D90U Operation Manual page 37

Using external equipment
Please use the INPUT 4 terminal when connecting HOMI equipment.
HOMI cable
I
~Q
rommerCiallyavaiiable)
HOMI
equipment
~
To watch an HOMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using INPUT on the remote control unit or
on the TV. (See page 46.)
Signal
Type
Color
Matrix
Press
./T
to select the desired item and
press ENTER.
Press
./T I ~/~
to select the desired setting
and press ENTER.
Auto/RGB/YCbCr Select the signal type from
4:4:4/YCbCr 4:2:2 an HDMI terminal. Unless
the image quality looks
obviously poor, select Auto.
Auto/ITU60 1/ Select the internal color
ITU709 space conversion method
when an RGB signal is
input. Normally, select
Auto.
Press MENU and the MENU screen displays.
Dynamic Standard/
Range Out of Standard
Select the signal amplitude
range. Normally, select
Standard.
Press MENU to exit.
• Refer to your external equipment operation manual for
the signal type.
Set whether or not to use
VIEW MODE based on
signal recognition
I
including an HDMI signal.
Auto View Enable/Disable
Press
./T
to select "HOMI Setup", and then
press ENTER.
Press
~/~
to select "Option".
@-36