Inserting And Activating The Filter - Jura IMPRESSA A5 One Touch Instructions For Use Manual

5 Maintenance
T Push the milk system down and remove it.
T Dismantle the milk system into its individual
parts.
T Rinse all parts under running water. If there
are severely dried on milk residues, firstly
immerse the individual parts in JURA
Cappuccino Cleaner and then clean them
thoroughly.
T Fit the air intake pipe.
T Reassemble the milk system, noting the
numbering on the parts.
50
T Insert the assembled individual parts into
the dual spout and press them together.
T Fit the dual spout on the machine. It will
click into place audibly.

Inserting and activating the filter

Your IMPRESSA no longer has to be descaled if you
are using the CLARIS Blue filter cartridge. If you did
not activate the filter cartridge the first time you
used the machine, you can do this now as follows.
E Perform the 'inserting the filter' operation
without any interruptions. This will ensure
that your IMPRESSA always produces its
best.
Precondition: READY
k T Press and hold the Rotary Switch until
RINSE
appears.
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to enter the
programme item.
NO -
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK
INSERT FILTER
T Remove and empty the water tank.
T Open the filter holder.
is displayed.
FILTER -
YES p is
is