IOCELL CellDisk User Manual page 17

Mbps, CellDisk supports about 900KB/sec for reading and 500KB/sec for writing.
Q. How many CellDisks can be connected at the same time?
A. Theoretically, you can connect up to 127 CellDisks to a computer at the same
time. If your computer is lack of available USB ports, you can expand the number
of available ports by using a USB hub.
Q. Can CellDisk be used as a bootable disk?
A. Yes, it is possible with BIOS computer support.
Q What is the function of the LED on the CellDisk?
A. When CellDisk is first plugged into the USB port of your computer, the
CellDisk LED turns on and off. This means that your computer has recognized
your CellDisk. During a file transfer, your CellDisk LED will flash. Do not unplug
the CellDisk during a file transfer. Doing so may cause corruption of the data
being transferred, or cause corruption of the FAT table of your CellDisk. If the
FAT table is corrupted, the CellDisk can go back to its original working condition
by formatting it; however, your data will be lost.
Q. After data has finished transferring from my computer to my CellDisk,
the LED still flashes. Why?
A. A computer finishes data transfer from the CPU to the built-in buffer memory.
In this case, the computer thinks that the data transfer has finished; however, it
takes more time to transfer data from the buffer to the CellDisk. This causes the
LED to continue flashing. Please do not unplug the CellDisk while the LED is
flashing. This may damage your data or your CellDisk FAT table.
Q. Is it possible to share the CellDisk through your network or LAN
connection?
A. Yes.
Q. I do not have any driver CD-ROM. What can I do?
A. Go to the www.celldisk.com website and download and install the driver
installation program.
Q. My computer does not recognize CellDisk.
A. Click Start Settings Control Panel System and select Device Manager tab.
Then check whether your computer has a USB controller.
17