Menu System; Mask Key; Touch Sensor Tone; Manual Clock Adjustment - Kenwood KDC-8021 Instruction Manual

Menu system

Mask Key

Because authorization by the Mask Key is required when it's
removed from the vehicle, personalizing this unit by using the
Mask Key is a help in preventing theft.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Mask key" is displayed.
3
Enter Mask key mode
Press the [4] or [¢] button for at least 1 second.
"BAR BAR 1"/"TRANSMIT1" is displayed.
4
Enter the Mask Key's signal
Hold down the transmit button on the Mask Key until the full
transmit level indicator lights up in the display.
"BAR BAR 2"/"TRANSMIT2" is displayed.
• Keep the Mask Key close to the signal sensor when you transmit
the Mask Key's signal.
• If the Mask Key's signal does not be received correctly, the display
will return to "BAR BAR
the procedure in step 4.
1"/"TRANSMIT1" . In this case, repeat
5
Reenter the Mask Key's signal
Hold down the transmit button on the Mask Key until the full
transmit level indicator lights up in the display.
"BAR BAR BAR"/"APPROVED" is displayed, and the Mask Key
function activates.
Press the Reset button and when it's removed from the
battery power source
1
Turn the power ON
The vehicle engine turns ON.
"BAR BAR 1"/"TRANSMIT1" is displayed.
2
Enter the Mask Key's signal
Repeat steps 4 and 5 above, and enter the Mask Key's signal.
"BAR BAR BAR"/"APPROVED" is displayed.
The unit can be used.

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.
Display
"Beep ON"
"Beep OFF"

Manual Clock Adjustment

This adjustment can be done when the <Synchronize Clock> (page
31) is set as OFF.
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
— 30 —
Setting
Beep is heard.
Beep canceled.