Related Manuals for Kenwood KDC-7090R
Summary of Contents for Kenwood KDC-7090R
- Page 1 KDC-V7090R KDC-7090R CD-RECEIVER INSTRUCTION MANUAL B64-1902-00 (EN) COMPACT DIGITAL AUDIO...
-
Page 2: Table Of Contents
Contents Safety precautions...3 Handling Compact discs ...6 General features Power ...8 Switching Modes ...8 Volume ...9 Attenuator ...9 Loudness...10 System Q ...10 Speaker Setting...10 TEL Mute ...10 Faceplate Angle Adjustment ...11 Forced Closing ...11 Removing the Faceplate ...12 Clock display ...12 Audio control features Audio Control Setting ...13 Bass Centre Frequency...14... -
Page 3: Safety Precautions
DNPS, DNPP, Magazine random play, and CD Text display. Note that none of the KDC-C100, KDC-C302, C205, C705, and non-Kenwood CD changers can be connected. 2CAUTION You can damage both your unit and the CD changer if you connect them incorrectly. - Page 4 Key will be needed to restart the unit. If the unit still fails to operate properly after the RESET button has been pressed, contact your local KENWOOD dealer for assistance. • Press the reset button if the CD auto changer is first controlled and operates incorrectly.
- Page 5 Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate.
-
Page 6: Handling Compact Discs
Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Handling CDs •... - Page 7 Do Not Load CD Accessories in Slot Do not use commercially available CD accessories that can be loaded into the CD slot, such as stabilisers, protective sheets, or CD cleaning discs, since they can cause the unit to malfunction. Removing the CD Only remove the CD from the machine in a horizontal direction.
-
Page 8: General Features
General features ATT / LOUD KDC-V7090R ATT indicator Clock indicator Speaker Setting indicator LOUD indicator KDC-7090R Clock indicator ATT indicator Speaker Setting indicator LOUD indicator Power You can help prevent theft of the unit by reversing the faceplate so that the control panel cannot be seen, hiding the unit, and shutting off the audio. -
Page 9: Volume
Tuner mode CD mode External disc control mode 1 External disc control mode 2 / AUX mode Standby mode Selecting the standby mode: Press the SRC button repeatedly to select to "ALL OFF" . When "ALL OFF" is displayed, the standby mode is turned on. The standby mode turns all functions off although leaving the unit’s power on. -
Page 10: Loudness
General features Loudness This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up, when the loudness function is Turning Loudness On/Off: Hold down the LOUD button for one second or more to switch the loudness on and off. -
Page 11: Faceplate Angle Adjustment
The original source (i.e., the one used before the phone call) is returned to automatically, and the volume restored gradually. Faceplate Angle Adjustment You can adjust the faceplate angle for easy viewing. Sliding the faceplate: Hold down the ANG button for one second or more. NOTE Do not apply excessive force to the faceplate under setting 2. -
Page 12: Removing The Faceplate
General features Removing the Faceplate The faceplate can be detached from the unit, helping to deter theft. Removing the faceplate: Choose the way from among the following and open the faceplate. Turn the ignition off, hold down the SRC button for one second or more when the control panel has been hidden. -
Page 13: Audio Control Features
Audio control features KDC-V7090R Selecting mode KDC-7090R Selecting mode Audio Control Setting Adjust various parameters of sound quality. Hold down the AUD button for one second or more to enter the control mode. Selecting mode Press either the FM or AM button. -
Page 14: Bass Centre Frequency
Audio control features Bass Centre Frequency Adjust the centre frequency of the bass. Display and setting: "Bass FRQ"/"Bass F" : 60 / 70 / 80 / 100 (Only when the bass quality factor is set to 1.00, 1.25 or 1.50) / 150 (Only when the bass quality factor is set to 2.00) Hz. -
Page 15: Balance Level
Display and setting: "VOL Offset"/"V Offset" : - 8 – ± 0 Tuner features #1 – 6 KDC-V7090R Band display ST indicator AUTO indicator KDC-7090R Band display ST indicator AUTO indicator — 15 — ¢ DISP / NAME.S Frequency... -
Page 16: Tuner Features Tuning
Tuner features Tuning Press the SRC button repeatedly until the tuner mode is obtained. "TUNER" is displayed only when the tuner mode is selected. Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3. -
Page 17: Switching Display For Tuner
Whilst awaiting reception, "Waiting" will be displayed. 2WARNING To prevent accidents, drivers should not look at the display whilst driving. RDS features #1 – 6 TI/VOL ADJ KDC-V7090R TI indicator PTY indicator KDC-7090R PTY indicator — 17 — ¢ DISP TI indicator... -
Page 18: Rds Features Rds (Radio Data System)
RDS features RDS (Radio Data System) RDS is a digital information system that lets you receive signals besides those of regular radio programmes, such as network information being transmitted from radio stations. When listening to an RDS station (ie, a station with RDS capability), the programme service name of the station is displayed along with the frequency, advising you quickly which station is being received. -
Page 19: Presetting Volume For Traffic Information/News
Presetting Volume for Traffic Information/News Preset the volume level to be used for traffic information and news broadcasts. Tune into the station for which you want to set the volume. Adjust the volume to the desired level. Hold down the VOL ADJ button for two seconds or more. The volume level blinks once in the display to indicate that the data has been stored. -
Page 20: Programme Type (Pty) Function
RDS features Programme Type (PTY) Function Conduct auto seek tuning only on those stations with selected kinds of programmes. Press the PTY button. "PTY" is displayed, and the Programme Type Selection (PTY) Mode entered. If you make no key input in 30 seconds, the mode will automatically turn off. -
Page 21: Changing Language For Programme Type(Pty) Function
French Portuguese Dutch Norwegian Press the DISP button to end the changing language mode. CD/External disc control features SCAN RDM M.RDM KDC-V7090R Track number KDC-7090R Track number IN indicator — 21 — DISC – ¢ DISP / DISC NAME.S Track time... -
Page 22: Cd/External Disc Control Features Playing Cds
The external disc control mode will differ, depending on the unit that is connected. Mode Display Examples • "CD2" ...when a CD player is connected • "DISC" ...when a disc changer is connected • "DISC1" , "DISC2" ...when two disc changers are connected Pausing and Restarting Disc Play: Press the 38 button to make the disc pause. -
Page 23: Fast Forwarding And Reversing Disc Play
Track time Disc name (DNPS) (only when being preset) Disc title (Units featuring CD text/MD only) Track title (Units featuring CD text/MD only) NOTE • You can give names to discs through the presetting disc name function (page 26). Note that depending on the unit, display may not be possible. •... -
Page 24: Disc Search
CD/External disc control features Disc Search Function of disc changers) Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. Making a Reverse Disc Search: – Press the DISC button to display the desired disc number. -
Page 25: Track Scan
number blinks in the display when track repeat is on. "Disc Repeat ON" / "D-Repeat ON" is displayed and the disc number blinks in the display when disc repeat is on. NOTE Repeat play is cancelled when you eject the disc. Track Scan Successively play the beginning of each track on a disc until you find the track that you want to listen to. -
Page 26: Presetting Disc Names (Dnps)
CD/External disc control features Presetting Disc Names (DNPS) Store the names of discs to be displayed when played. Play the disc whose name you want to preset. NOTE • This function is not available for disc changers that do not feature the Disc Name Preset function. -
Page 27: Random Play
Random Play Play all the tracks on the current disc in random order. Press the RDM button to switch the random play function on and off. "Random ON" is displayed when random play is turned on. The display of the track number changes continuously as the next track is being selected. -
Page 28: Disc Name Preset Play (Dnpp)
CD/External disc control features Disc Name Preset Play (DNPP) (Function of Remote Control) If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it. -
Page 29: Menu Settings
Menu settings #1 – 6 KDC-V7090R Menu display NEWS indicator AUTO indicator KDC-7090R Menu display NEWS indicator AUTO indicator Menu System MENU You can set the defaults for additional functions in the menu mode. Make a setting for each function, referring to the following operations. -
Page 30: Mask Key
Menu settings Mask Key If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft. When using the unit for the first time: In order to deactivate the demonstration mode, be sure to press the transmit button to transmit the Mask Key's signal. -
Page 31: Automatic Time Adjustment
The time display will blink. • Adjusting the hours Press the FM button to advance the hours, or press the AM button to make the hours go back. • Adjusting the minutes Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back. -
Page 32: Variable Illumination Colour Setting
Menu settings Function of the KDC-V7090R Variable Illumination Colour Setting You can set the display to a desired colour. Display and setting: Select the display "Color" during the selecting function in the menu mode. To set a colour manually: Hold down on the 4 or ¢ button. Pressing the ¢... -
Page 33: Time Setting For Removing The Faceplate
Time setting for removing the faceplate You can set the interval during which the open control panel cannot reverse to be hidden. During the period you have set, the faceplate can be removed from the faceplate bracket. Display and setting: "Off Wait"... -
Page 34: Selecting Tuning Mode
Menu settings Selecting Tuning Mode <In Tuner mode> You can choose from three tuning modes: auto seek, preset station seek, and manual. The "AUTO 1" indicator lights up when auto seek tuning is selected, and the "AUTO 2" indicator lights when preset station seek tuning is selected. Display and setting: "Auto 1"... -
Page 35: Auto Tp Seek Function
Auto TP Seek Function When the TI function is on and poor reception conditions are experienced when listening to a traffic information station, another traffic information station with better reception will be searched for automatically. This function is on, when unit is first powered on. -
Page 36: Basic Operations Of Remote Control
Basic Operations of remote control Accessory of the KDC-V7090R #0-9/A-Z PROG DNPP DIRECT DIRECT 4/¢ TUNE TRACK FM/DISC – AM/DISC – DISC REMOTE CONTROL UNIT CA-R66 2CAUTION Do not set the remote control on hot places such as above the dashboard. - Page 37 Tuner mode CD mode External disc control mode 1 External disc control mode 2 / AUX mode Standby mode NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected.
- Page 38 Basic Operations of remote control Accessory of the KDC-V7090R CD/External disc control features • 4/¢ buttons Press the 4 button to search through the tracks backwards. Press the ¢ button to search through the tracks forwards. Used to move the cursor whilst entering disc name. •...
-
Page 39: Accessories
2CAUTION • If your car is not prepared for this special connection-system, Number of items consult your KENWOOD dealer. • Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug. • Make sure that all cable connections are securely made by inserting jacks until they lock completely. -
Page 40: Connecting Cables To Terminals
Connect to the terminal that is TEL MUTE grounded when either the telephone rings or during conversation. NOTE To connect the KENWOOD navigation system, consult your navigation manual. Connect either to the power control P.CONT terminal when using the optional ANT.CONT. -
Page 41: Installtion
Connecting Cables to Terminals 2WARNING Connecting the ISO Connector (see p.40) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. -
Page 42: Removing The Unit
Removing the Unit Removing the hard rubber frame Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. Accessory4 Removal tool Removing the Unit Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame. -
Page 43: Locking The Faceplate To The Unit
Locking the faceplate to the unit Locking the faceplate to the unit If you want to lock the faceplate to the unit so that it does not fall off, follow the directions below. Refer to the function "Removing the faceplate (page 12)" and remove the faceplate. -
Page 44: Troubleshooting Guide
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM The power does not turn on. The fuse has blown. - Page 45 Troubleshooting Guide PROBLEM No sound can be heard, or the The Attenuator function is turned on. volume is low. The fader and/or balance settings are set all the way to one side. The input/output cables or wiring harness are connected incorrectly.
- Page 46 Troubleshooting Guide CD/MD/External disc control mode PROBLEM The disc control mode cannot No cable has been connected to the disc changer input be selected. terminal on the unit. The specified disc does not The specified CD is very dirty. play, but another one plays The CD is upside-down.
- Page 47 ] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc starts playing again. If this indicator blinks, the CD player is malfunctioning. ] Eject the CD and try inseting it again.
-
Page 48: Specifications
Usable sensitivity (S/N = 20dB) ...25 µV LW tuner section Frequency range ...153 kHz – 281 kHz Usable sensitivity (S/N = 20dB) ...45 µV CD player section Laser diode ...GaAlAs ( =780 nm) Digital filter (D/A) ...8 Times Over Sampling D/A Converter ...1 Bit Spindle speed ...500 –...