Connecting Wires To Terminals - Kenwood KDC-2092R Instruction Manual

Connecting Wires to Terminals

KENWOOD disc changer input (KDC-4021/4021V only)
To connect the Disc changer, consult your
Disc changer manual.
Connector Function Guide
Pin Numbers for
Wire Color
ISO Connectors
External Power
Connector
A–4 Yellow
Blue/White
A–5
A–7 Red
A–8 Black
Speaker
Connector
B–1 Purple
B–2
Purple/Black
B–3 Gray
B–4 Gray/Black
B–5
White
B–6
White/Black
B–7
Green
B–8
Green/Black
14
15
Fuse (10A)
Functions
Battery
Power Control
Ignition (ACC)
Battery wire (Yellow)
Earth (Ground)
Connection
Ignition wire (Red)
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
A–4 Pin (Yellow)
Front Left (+)
Connector A
Front Left (–)
Rear Left (+)
Connector B
Rear Left (–)
10
Rear left output (White)
Rear right output (Red)
4
REAR
13
Wiring harness
(Accessory1)
17
TEL mute wire (Brown)
6
If no connections are
made, do not let the wire
7
come out from the tab.
Power control/ Motor
antenna control wire
(Blue/White)
A–7 Pin (Red) 8
9
8 6 4 2
7 5 3 1
8 6 4 2
7 5 3 1
— 23 —
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3)
L
Antenna Cord (ISO)
R
FM/AM antenna
input 3
16
Connect to the terminal that is
grounded when either the
TEL MUTE
telephone rings or during
conversation.
To connect the
KENWOOD navigation
system, consult your
navigation manual.
18
Connect either to the power
20
control terminal when using
P.CONT
the optional power amplifier,
ANT.CONT
or to the antenna control
terminal in the vehicle.
2
1
21
22
23