ProTELEC Thinline Series User Manual

System Functions
Door Chime
You can enable monitor for all Perimeter zones in the system to sound a doorbell
chime at the keypad anytime a zone is opened. Press and hold the CHIME (5) key for
two seconds. The Door icon will display and the doorbell chime sounds. Pressing the
CHIME key again for two seconds turns off this function.
8
Easy Exit
This function allows you to exit your home while the system is armed. Press and hold
the EXIT (8) key until the exit countdown begins to display and then exit. The system
automatically arms again after the countdown completes.
Resetting Sensors 2
RESET
Use this function to reset the smoke detectors after an alarm has occurred. Press and
hold the RESET (2) key for two seconds. The Flame icon will clear from the display
when the Sensor Reset operation is complete and the smoke detectors are reset.
User Codes
4
+[your code]+[user number]+[user code]+[level]
CODE
This function allows you to Add or Delete user codes. Each user is assigned 3
settings:
The User Number is how the system identifies a user.
The User Code is the four digit number a user enters into the keypad to arm, disarm
or to perform other system operations.
The User Level - the user is also assigned a level of authority (Master, Standard,
Limited, or Scheduled) to determine the functions the user can access. See below for
User Code authority levels.
• Press and hold the CODE key (4) until the keypad beeps once and enter your user
code.
• Enter the user number to add or delete.
XT30 = 01 - 30
XT50 = 01 - 99
• Enter the four-digit user code to assign to the user number or 0000 to delete an
existing user.
• Enter the authority level (1-4)
Level 1 = Scheduled User (XR40/XT50)
The Scheduled authority level performs all the system function of the Limited
level during a valid schedule with the exception of turning Outputs on or off
and System Test. Disarming is allowed outside of a schedule, but an
Unauthorized Entry message is sent to your monitoring station.
Level 2 = Limited User (XR40/XT50)
The Limited authority level can perform all the system functions of the
Standard level with the exception of Bypassing zones and Extending schedules.
Level 3 = Standard User (XRS6/XR20/XR40/XT30/XT50)
The Standard authority level can perform all system functions except adding or
deleting user codes.
Level 4 = Master User in (XRS6/XR20/XR40/XT30/XT50)
The Master authority level can perform all system functions.
Zone Status 9
ZONE
Use this function to display burglary protection zones that are faulted while the
system is disarmed. Any faulted burglary zones are shown in the display allowing you
to correct the problem before arming.
Alert Operation
Steady Tone A trouble condition on the system. A zone number
may be displayed. Pressing any key silences the
steady alert tone.
1 One-Second Beep Indicates the successful completion of a function.
4 Short Beeps When an incorrect key or function is entered.
1 Short Beep Each time a key is pressed.
Panic Key Operation
Your keypad may be programmed to send a Panic, Emergency, or Fire report
to your monitoring station. If this option is programmed for your keypad,
icons appear below the top row Select keys. Press and hold the two Select
keys adjacent to the desired icon for 2 seconds and a beep from the keypad
is heard. The report is sent to your monitoring station.
Top Row Select Keys
Police Emergency
R
P P TELEC ALARMS TELEC ALARMS
P P TELEC ALARMS TELEC ALARMS
RO RO RO RO
Protecting life and property since 1968
www.protelecalarms.com
Key Contact Numbers
Alarms in Progress
(204) 949-1415 or 1-866-949-1415
Customer Service
(204) 975-0698 or 1-866-975-0698
csc@protelecalarms.com
Billings and Administration
(204) 975-0689 or 1-866-975-0689
ProTELEC Alarms User Guide
Thinline™ Series LCD Keypads
Power LED
Armed LED
Backlit Logo
and Proximity
Antenna
Fire
SIMPLE TO USE
The User Menu allows you to quickly browse through menu options.
Disarming and Arming functions are fast and easy. Any function allowed by
the user authority level is simply accessed through the keypad, such as
silencing alarms, resetting sensors, or displaying events.
CODELESS ARMING AND DISARMING
A built-in proximity reader is available on some Thinline LCD keypads that
allows you to simply present a proximity credential to the keypad to arm or
disarm the system without the need to remember a user code.
USER-FRIENDLY SHORTCUT KEYS
Eight one-button shortcut keys simplify operation providing access to a
variety of functions. For example, pressing the HOME key for two seconds
arms your system when you're at home for the evening. The keys enable
users to quickly arm, monitor zones, easy exit, test or reset the system and
a variety of other functions.
PLEASE TAKE A MOMENT
To learn the range of features of your system, please read through this user's
guide thoroughly. All displays and keypad operation are completely
described.
32-Character Display
Select Keys
COMMAND
Key
Back Arrow
Key
Data Entry Digit keys