Nokia 7360 Service Manual page 14

CMO Operations & Logistics
WW Competence Transfer
Multimedia Creation & Support
17. Remove the UI PWB Holder including the UI MODULE from
the Engine Module.
19. Now remove the UI MODULE from the UI PWB HOLDER.
21. . Use the SS-34 to open the connector of the LCD MODULE.
23. Slightly bend the UI SHIELD ASSY and press out the LCD
MODULE. Prevent deforming the UI SHIELD ASSY
Service Manual 7360 RM-127
Page 14
(26)
CONFIDENTIAL
18. Hold the UI PWB HOLDER with your fingers. Press the snaps
down with the tweezers and hold it while moving the UI
MODULE to the right.
20. Unscrew the six Torx Plus® size 6 screws in the order shown.
For Assembly use the reverse order. IMPORTANT: Torque for used
B-Cover Assy = 23Ncm. Torque for new B-Cover Assy = 28Ncm
22. Separate the UI SHIELD ASSY including the LCD MODULE from
the ENGINE MODULE.
24. .Remove the ENGINE MODULE from the B-COVER ASSY
Copyright © 2005 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
21.11.2005