Codabar Halves; Codabar Stitch; Codabar Require Start/Stop Match; Codabar Require Quiet Zones - NCR RealPOS User Manual

Codabar Halves

Selection Programming Tag Sequence
Disable Programming Mode, Hex 7, Hex 4, Hex 5, Hex 2, Save and Reset
Enable Programming Mode, Hex 7, Hex 4, Hex 5, Hex 3, Save and Reset

Codabar Stitch

Selection Programming Tag Sequence
Disable Programming Mode, Hex 7, Hex 4, Hex 5, Hex 4, Save and Reset
Enable Programming Mode, Hex 7, Hex 4, Hex 5, Hex 5, Save and Reset

Codabar Require Start/Stop Match

Selection Programming Tag Sequence
Disable Programming Mode, Hex 6, Hex B, Hex 2, Hex 0, Save and Reset
Enable Programming Mode, Hex 6, Hex B, Hex 2, Hex 1, Save and Reset

Codabar Require Quiet Zones

Selection Programming Tag Sequence
Disable Programming Mode, Hex 6, Hex B, Hex 2, Hex 2, Save and Reset
Enable Programming Mode, Hex 6, Hex B, Hex 2, Hex 3, Save and Reset
Note: Ensure that this sequence is set to Enable if Codabar is programmed to read
very short tags (tags with less than 4 data characters). This programmable
prevents getting a very short Codabar tag from another barcode type or from
package graphics.

Codabar Start/Stop Transmission

Selection Programming Tag Sequence
abcd Programming Mode, Hex 6, Hex B, Hex 1, Hex 0, Save and Reset
ABCD Programming Mode, Hex 6, Hex B, Hex 1, Hex 1, Save and Reset
tn*e Programming Mode, Hex 6, Hex B, Hex 1, Hex 2, Save and Reset
TN*e Programming Mode, Hex 6, Hex B, Hex 1, Hex 3, Save and Reset
Chapter 5: Programming 5-79
Setting
Default
25325
Setting
Default
25513
Setting
Default
25320
Setting
Default
25321
25322
Setting
Default
25327