Convenient Cd Recording (Ct-203/Kxf-W4010; Deck B Only); Cd Synchro Recording - Kenwood CT/KXF-W Instruction Manual

Convenient CD recording (CT-203/KXF-W4010; Deck B only)

By connecting this unit with a KENWOOD "f", "ƒ", "
and a KENWOOD CD player with a SYSTEM CONTROL jack using system control cords, recording on this unit and playback on
the CD player can be started simultaneously.
Since this unit is not designed for recording with metal (TYPE
1
Preparation
Complete the connections referring to
"System connections".
2
Make "Playback (recording) preparation".
(CT-203/KXF-W4010; Insert a tape in
deck B.)
3
(Load a disc in the CD player.)

CD synchro recording

1
Perform auto-bias adjustment. (The bias adjustment is applied to deck B.)
2
Adjust the recording level.
1
Play a CD.
Press the 6 key
of the CD player.
3
Set the record-pause mode.
CT-2050/KXF-W6010
CT-203/KXF-W4010
4
Start playing the CD.
Press the 6 key of the CD player.
Press the 6 key of the CD player.
To pause :
Press the 6 key of the CD player.
To restart recording :
Press the 7 key of the CD player.
To stop :
6
0
AUTO BIAS
2
Set the record-pause mode.
8 ¶
PAUSE REC/ARM
÷ While pressing the PAUSE (8)
key, press the REC/ARM (¶) key.
8 ¶
PAUSE REC/ARM
(ƒ)", type amplifier (receiver) with a SYSTEM CONTROL jack
) tapes, do not use metal tapes for recording.
: Keys and control used in the operations described on this page.
÷ The optinum bias is set in about 40 seconds, after which the deck
enters stop mode.
÷ For a fine adjustment after setting AUTO BIAS, refer to the description
of "Bias level adjustment". (CT-2050/KXF-W6010 only)
÷ To cancel the auto-bias adjustment operation in the middle, press
the stop (7) key.
÷ Recording is possible even when the auto-bias setting is omitted.
3
Adjust the recording balance
and recording level.
"How to record." ^
÷ While pressing the PAUSE (8) key, press the REC/ARM (¶) key.
÷ Synchro recording is not possible when tracks of more than one CD are
programmed using a Carrousel type CD player.
÷ Recording starts at this moment.
÷ When the CD player has completed playback, the cassette deck stops
recording and enters the stop mode.
÷ If the stop (7) key of the cassette deck is pressed, the cassette deck
enters the stop mode but the CD player does not stop.
CT-2050/203/KXF-W6010/W4010 (En/M)
&
4
Put the CD player in stop
mode.
Press 7 key of the
CD player.
21