Oracle Ilom System Console Overview; Log In To The Sp (Ser Mgt Port) - Sun Oracle SPARC T4-4 Installation Manual

Related Information
"Oracle ILOM System Console Overview" on page 51
■
"Oracle Solaris OS Configuration Parameters" on page 49
■

Oracle ILOM System Console Overview

When you power on the server, the boot process begins under the control of the
Oracle Integrated Lights Out Manager system console. The ILOM system console
displays status and error messages generated by firmware-based tests during server
startup.
By default, ILOM system console messages are directed to the NET MGT port. The
NET MGT port uses DHCP and allows connections using SSH.
Note – If you are unable to use DHCP on your network, you must connect to the
ILOM service processor using the serial management port to configure the network
management port for your network. See
Port" on page 52.
Related Information
"Assigning a Static IP Address to the SP" on page 50
■

▼ Log In to the SP (SER MGT Port)

After the service processor boots, access the ILOM CLI to configure and manage the
server. The ILOM CLI prompt (->) is displayed at the first time the service processor
is booted. The default configuration provides an ILOM CLI root user account. The
default root password is changeme. Change the password using the service processor
ILOM CLI password command.
1. If this is the first time the server has been powered on, use the password
command to change the root password.
...
Starting OpenBSD Secure Shell server: sshd.
Starting Servicetags listener: stlistener.
Starting FRU update program: frutool.
hostname login: root
Password: changeme
"Assign a Static IP Address to the NET MGT
Powering On the Server for the First Time 51