Subscribe to Our Youtube Channel
Related Manuals for Envion Therapure TPP240
Summary of Contents for Envion Therapure TPP240
- Page 1 ® ® air purifier with uv light air purifier with uv light owner ’ s guide TP240-051410...
-
Page 2: Table Of Contents
Table of conTenTs SAFETY INSTRUCTIONS Thank you for purchasing the Therapure ® IMPORTANT WARNINGS 240 air purifier. With UV germicidal UV Lamp Notice protection to reduce germs and Mercury Notice permanent HEPA type filtration to UV Lamp Disposal Notice purify the air, the Therapure 240 air ®... -
Page 3: Safety Instructions
safeTy insTrucTions imPorTanT warnings SAvE THESE INSTRUCTIONS Uv Lamp Notice UV Light is harmful to bare skin and eyes and can cause temporary or permanent loss of vision. WARNING: RISK OF ELECTRICAL SHOCK Never look directly at the UV lamp while it is illuminated; doing so could cause loss of vision! Only view illumination through the window at the front of the unit. -
Page 4: Product Benefits
ProducT benefiTs main ParTs » 1. Locking Latch Quadruple action purification: 2. Air Inlet Grill 1. Permanent HEPA type Filter takes particles out of the air, purifying it. 3. Permanent HEPA Type Filter: the permanent filter removes small visible and non-visible particles down to 0.1 microns in size. - Page 5 oPeraTing The TheraPure oPeraTing The TheraPure ® ® Before using the Therapure 240 air purifier, please read the following important information. Safety ® Electrical Ratings: 1. Do not place near fans. 120V Setting: 120Vac, 60 Hz 2. Keep both sides of the unit at least 1 foot away from a wall. Power consumption: 55 watts at high fan speed, Do not place the unit near curtains.
-
Page 6: Controls/Settings
oPeraTing The TheraPure cleaning & mainTenance ® Controls/Settings Keep the Therapure 240 functioning properly by cleaning the permanent HEPA type Filter each ® time the Clean Filter Indicator Light turns on. More frequent cleaning will be necessary if the unit Power Control –... -
Page 7: Cleaning External Surfaces
cleaning & mainTenance cleaning & mainTenance Cleaning External Surfaces Before replacing the Uv lamp, make sure the Therapure ® air purifier is turned off and unplugged. Let the lamp cool down for 5 minutes before replacing it. 1. Turn off and unplug unit. 2. -
Page 8: Troubleshooting
Check to ensure nothing is The inlet or outlet grill may poor filtering. blocking air inlet & air outlet. be blocked. © 2010 Envion, LLC. All Rights Reserved. Patents pending. Check & clean filter, Permanent filter may be clogged. if necessary.
Need help?
Do you have a question about the Therapure TPP240 and is the answer not in the manual?
Questions and answers
Where do I find the 2 white plastic parts that hold the germicidal bulb in place . I accidentally took them out with the old bulb .
How to disassemble TTP240B to reach fan for cleaning?