Download
Share
Print this page
Arbortech Mini-Grinder Owner's Instruction Manual
  1. Manuals
  2. Brands
  3. Arbortech Manuals
  4. Grinder
  5. Mini-Grinder
  6. Owner's instruction manual

Arbortech Mini-Grinder Owner's Instruction Manual

Arbortech mini-grinder owner's instruction manual
Hide thumbs

Advertisement

Quick Links

MINI-GRIN ER
OWNER'S INSTRUCTION M NU L
Thank you for purchasing an Arbortech Product.
Your Arbortech Mini Grinder has been designed & manufactured
to provide you with the highest satisfaction in performance,
TO SAVE TIME AND MONEY
durability and safe operation.
READ THIS MANUAL
TM
Double
Insulated
MIN.PK.BOOK001
REV-110112

Advertisement

loading
Need help?

Need help?

Do you have a question about the Mini-Grinder and is the answer not in the manual?

Questions and answers

Related Manuals for Arbortech Mini-Grinder

Summary of Contents for Arbortech Mini-Grinder

  • Page 1 MIN.PK.BOOK001 MINI-GRIN ER OWNER’S INSTRUCTION M NU L Thank you for purchasing an Arbortech Product. Your Arbortech Mini Grinder has been designed & manufactured to provide you with the highest satisfaction in performance, durability and safe operation. Double Insulated READ THIS MANUAL...

  • Page 2: Table Of Contents

    Page T BLE OF CONTENTS Rules for safe operation of electrical equipment Knowing your tool Unpacking and ssembly Operation Maintenance ccessories & Spare Parts Other Products Technical Information Please read these instructions before you use your Mini-Grinder.

  • Page 3: Rules For Safe Operation Of Electrical Equipment 2

    Rules for safe operation of electrical equipment 2 rbortech Mini Grinder is designed and built to meet and exceed ustralian and International Safety Standards. Use only rbortech approved or other qualified service centres for the servicing and/or repair of this tool. For further assistance contact rbortech. rbortech Mini Grinder is double insulated to provide the highest possible operator protection from electric shock.
  • Page 4 ELECTRIC L S FETY • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. •...
  • Page 5 • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations • Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

  • Page 6: Knowing Your Tool

    5 Knowing your tool Note: text, diagrams and data are correct at time of printing. In the interests of continuous improvement of our products, technical specifications are subject to alteration without prior notice. Mini-Grinder Extension arm uxiliary handle Cord 4g x 1/2”...
  • Page 7 Knowing your tool (cont’d) 6 Spindle Lock Mini-Grinder Spindle Lock On/off switch Belt Tensioning Fig.4 Mounting plate Unpacking and assembly 1. Remove the Mini Grinder from its box. Inspect to ensure that no damage has occurred during shipping. If damaged, report to the retailer immediately.

  • Page 8: Operation

    7 Operation BL DES 1 To change blades place a flat head screwdriver into the Mini Grinder spindle lock and hold (seen in fig .5) then unscrew the cutter clamping bolt by using the llen key provided and Fig.5 remove blade ( as shown in fig 6) 2 Place new blade securely on the small pulley.
  • Page 9 Supplied with the diamond blade) Attachment or Pre-Assembled Mini-Grinder There is a brass seating washer loosely fixed to the underside of this cutter. It positions the cutter forward to prevent collision with the inside face of the guard. Please ensure it is fitted on the correct side of the cutter as shown in the diagram.
  • Page 10 • Ensure the machine is running BEFORE contacting the material, to be worked on. • To sand, polish or scrub, hold the Mini-Grinder horizontally. (as shown in fig.12). Fig.12 • Use the Mini Woodcarver Blade to cut or remove wood and plastics.
  • Page 11 10 Operation (cont’d) To trench cut, hold the Mini-Grinder vertically and simultaneously lower into the wood and pull towards you. (as shown in fig.13) SHOWING NGLE & DIRECTION OF CUT 25-30 is a comfortable working angle. 25-30 ngle Fig.13 • Use the bottom edge of the blade (as shown in fig.13)

  • Page 12: Maintenance 11

    Maintenance 11 Sharpening ngle Fig.15 Fig.16 Cleaning the grills and switch Regulary check to see if any dust or foreign matter has entered the grills positioned on the front and back of the motor or under the switch (as shown in fig.17).
  • Page 13 12 Maintenance Tensioning or replacing the belt Unplug the Mini-grinder • Remove the 4 belt tensioning cap screws (shown in fig. 18). • To remove top cover , remove the 3 cover screws (see knowing your tool page 5) then •...

  • Page 14: Ccessories & Spare Parts

    Other Products 13 ccessories & Spare Parts ccessories vailable for the Mini-Grinder Mini Wood Carver Blade MIN.FG.001 Mini-Woodcarver Blades x 2 MIN.FG.002 4mm Sharpening File MIN.FG.003 Replacement Pulley Belt MIN.FG.004 Bearing & Spindle ssembly Sanding MIN.FG.006 Mini-Sanders 4x assorted sanders Disk MIN.FG.008 4 x 40 Grit Mini-Sanders...
  • Page 15 14 Other Products Woodcarver Pro-4 Kit Wherever waste wood needs to be removed rapidly or cut, shaped, trimmed or trenched, you will find the 100mm Woodcarver an ideal and versatile attachment for an angle grinder. This Pro-Kit contains a 100mm Woodcarver blade and Pro-Guard.
  • Page 16 Other Products 15 Power Chisel Power Tool n excellent tool for all woodworkers in all applications. Safe, versatile and completely dust free in operation, it is ideal for experts and beginners alike. The constant reciprocating action gives incredible control to the user, and also the ability to carve difficult and uneven timbers which traditionally have been hard to carve.

  • Page 17: Technical Information

    16 Technical Information Max. Blade diameter: 50 mm Max. RPM: 18,000 rpm @ extension spindle Power: 5.8 ~ 700 Watt Rating: 230-240V, C, 50-60Hz 120V, C, 60Hz Disc Bore Size: 9.5mm Max. cutting depth: 10 mm Weight: 1.83 Kg Overall Length: 350mm CE-Declaration of Conformity: We declare under our sole responsibility that this product is in conformity with the CE...
  • Page 18 NOTES...
  • Page 19 NOTES...
  • Page 20 PERTH • WESTERN USTR LI TEL: 08 9249 1944 • F X: 08 9249 2936 U.S. . -Tollfree: 866-517-7869 U.S. Office: 978-466-7945 U.S. Fax: 866-515-8104 EUROPE: T: +49 2724-288301 F: +49 2724-205515 Website: www.arbortech.com.au US Website: www.arbortechusa.com Facebook: www.facebook.com/arbortechtools Email: arbortech@arbortech.com.au...