Sony PXW-FS7 Operating Instructions Manual page 71

Video
Item Sub-item setting
Monitor LUT
Category
LUT / Look Profile / User 3D
Monitor LUT
LUT
settings
Available in Cine
EI mode only.
LUT Select
P1: 709(800%)
P2: HG8009G40
P3: HG8009G33
P5: S-Log3
U1
U2
U3
U4
U5
U6
Look Profile Select
1: LC-709
2: LC-709typeA
3: SLog2-709
4: Cine+709
User 3D LUT Select
User 3D-1
User 3D-2
User 3D-3
User 3D-4
SDI1 & Internal Rec
MLUT On / MLUT Off
SDI2
MLUT On / MLUT Off
HDMI
MLUT On / MLUT Off
Viewfinder
MLUT On / MLUT Off
Output Display
SDI2
On / Off
Output signal
settings
HDMI
On / Off
Description
Sets the type of Look applied as a monitor LUT.
LUT:
Outputs video with applied preset LUT or user LUT.
Look Profile:
Outputs video close to print film or video which is suitable
as the start point of color grading, by selecting a Look
number.
User 3D LUT:
Outputs video with applied user 3D LUT.
Selects the LUT type, when Monitor LUT >Category is set to
LUT.
709(800%):
Signal with ITU-R709 base curve with extended dynamic
range up to 800%.
HG8009G40:
Signal using HyperGamma with 800% dynamic range,
109% white limit, and 18% gray card video output of 40%.
HG8009G33:
Signal using HyperGamma with 800% dynamic range,
109% white limit, and 18% gray card video output of 33%.
S-Log3:
Log signal with 1300% dynamic range that mimics film
characteristics, close to Cineon Log curve.
(Enabled when Base Setting >Color Space in the System
menu is set to SGamut3.Cine/SLog3)
U1 to U6:
User LUT signals imported from an SD card.
Selects the type of Look profile, when Monitor LUT
>Category is set to Look Profile.
Selects the type of user 3D LUT.
Selects whether to apply monitor LUT to the SDI OUT1
output video and the video recorded on XQD memory cards.
Selects whether to apply monitor LUT to the SDI OUT2
output video.
Displays whether monitor LUT is applied to the HDMI output
video.
Selects whether to apply monitor LUT to the viewfinder
output video.
Selects whether to superimpose menus and status on the SDI
output signal and HDMI output signal.
71