Direct Track Search; Direct Disc Search - Kenwood KDC-8090R Instruction Manual

• If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to input the
changes.
• Pressing the reset button erases the disc names stored in this
unit, but does not erase the names stored in a disc changer.

Direct Track Search

Using the remote control, make direct input of the track
number that you want to listen to.
1
Using the numeric buttons on the remote control, enter the
number of the track that you want to listen to.
The selected track number blinks in the display for 10 seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be cancelled.
Press either the 4 or ¢ button whilst the track number is
2
blinking.
The track specified in step 1 starts playing.
Cancelling Direct Track Search During Its Operation:
Press the 38 button.
NOTE
You cannot use the direct track search function during random or
magazine-random play.
(Function of remote control)
— 31 —

Direct Disc Search

(Function of disc changers with remote control)
Using the remote control, make direct input of the disc
number that you want to listen to.
1
Using the numeric buttons on the remote control, enter the
number of the disc that you want to listen to.
The selected disc number blinks in the display for 10 seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be cancelled.
NOTE
• Input "0" to select disc #10.
• If you enter more than two numbers all at once, a search will
be made only of the last number entered.
• You cannot use the direct disc search function during random
play or magazine random play.
+
2
Press either the DISC or DISC
inputted is blinking.
The disc specified in step 1 starts playing.
Cancelling Direct Disc Search During Its Operation:
Press the 38 button.
–
button whilst the number