Advertisement
CONVERSION
INSTRUCTIONS
Sear Burner Conversion
7.
Remove screws at the back of burner to
detach burner from bracket. Then lift back
of the sear burner while sliding burner out
of firebox.
(Fig. 7)
8.
Insert the provided
orifice removal tool (B)
into the burner opening and unscrew orifice
from end of valve.
9.
Put the new orifice into the orifice
removal tool (B), and then insert the tool
into the burner opening and tighten the new
orifice to the valve.
Make sure you are using the correct orifice,
which is marked "1.44".
(Fig. 9)
1.44
Fig. 9
Side Burner
Conversion
10.
Loosen the side burner screws to expose
the side burner nozzle for changing.
Insert the tool into the valve and unscrew
orifice
from end of valve. Put the new orifice into the
orifice removal tool and tighten the new orifice
into the valve.
Make sure you are using the correct orifice,
which is marked "1.31".
(Fig. 10)
6
Advertisement
