Troubleshooting - Portland Electric Blower vacuum mulcher Owner's Manual & Safety Instructions

TROUBLESHOOTING

PROBLEM
Unit will not blow
or mulcher.
Unit will not start.
Item 62337
POSSIBLE CAUSE
1. Bag full
2. Blocked tube
3. Blocked impeller
4. Dirty bag
5. Torn bag
6. Bag unzipped
7. Unit unplugged
1. Unit is unplugged.
2. Power/speed switch is in
the OFF position.
3. Defective power switch.
4. Vac tubes are not correctly
installed.
5. Intake gate/cover is not
closed.
6. Blower tube or bag
assembly not correctly
installed.
7. House circuit may have
tripped.
For technical questions, please call 1-888-866-5797.
SOLUTION
1. Empty the bag.
2. Clear the blockage.
3. Clear the blockage
4. Clean the bag.
5. Replace the bag.
6. Zip up the bag.
7. Plug into an outlet or an extension
cord.
1. Check cord to make sure it is plugged
into an electrical outlet.
2. Slide switch to high or low.
3. Call techincal support: 1-888-866-5797
4. Check vac tubes to ensure that they
are allowing the switch to be engaged
when correctly installed.
5. Ensure that gate/cover is fully closed
and locked.
6. Check blower tube or bag assembly
to ensure that they are allowing the
switch to be engaged when correctly
installed.
7. Check wall circuit breaker panel and
reset if necessary.
19
Page 19