How It Works Wilson Electronics DT Cradle Mount antenna will collect the cell tower signal and send it through the cable to a signal booster or directly to the cell phone or cellular data card. When the cellular device transmits, the signal is transferred to a signal booster or directly to the antenna and broadcasted back to the cell tower.
Page 3
(or to connects to the the second cradle antenna. length of cable if you are using it) Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
Page 4
(or to the antenna. second length of cable if you are using it) Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
Page 5
If you use both, connect them together with the Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
Page 6
Returned Material Authorization (RMA) number supplied by Wilson Electronics. Wilson Electronics shall, at its option, either repair or replace the product. Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer if within the continental U.S.
About Wilson Electronics Wilson Electronics, Inc., a leader in the wireless communications industry for over 40 years, designs and manufactures signal boosters, antennas and related components that significantly improve cellular telephone signal reception and transmission in a variety of mobile, small building, and large building applications.
Need help?
Do you have a question about the SIGNALBOOST DT and is the answer not in the manual?
Questions and answers