Loading And Replacing The Battery; Basic Operations; In Tuner Source; In Cassette Tape Source - Kenwood DPX-3030 Instruction Manual

Loading and Replacing the battery

Use one lithium battery (CR2025).
Insert the batteries with the + and – poles aligned properly,
following the illustration inside the case.
2WARNING
Store unused batteries out of the reach of children. Contact a doctor
immediately if the battery is accidentally swallowed.
Do not set the remote on hot places such as above the dashboard.

Basic operations

[VOL.] buttons
Adjusting the volume.
[SRC] button
Each time the button is pressed the source switches.
For the source switching order refer to <Selecting the Source>
(page 8).
[ATT] button
Turning the volume down quickly.
When it is pressed again it returns to the previous level.

In Tuner source

[FM]/ [AM] buttons
Select the band.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
[4]/ [¢] buttons
Tune up or down band.
[#0] — [#9] buttons
Press buttons [#1] — [#6] to recall preset stations.
[DIRECT] button
Enters and cancels the <Direct Access Tuning> (page 15) mode.

In Cassette tape source

[4]/ [¢] buttons
Do <DPSS (Direct Program Search System)> (page 18).
[38] button
Plays the reverse side of the tape.
[FM] button
Fast forwards the tape.
When the [38] button is pressed it releases.
[AM] button
Rewinds the tape.
When the [38] button is pressed it can be released.
[#0] — [#9] buttons
When in <DPSS with the Remote> (page 18) enter the number
of songs.
— 27 —