Page 1
EP2199-B I M P O R T A N T S A F E T Y I N F O R M A T I O N READ ALL INSTRUCTIONS BEFORE USING STEAM CLEANER. USE ONLY AS DIRECTED.
Page 2
Congratulations on your choice of the H2O MOP X5™, a new more compact and lighter steam cleaner with a detachable hand-held steamer. The H2O MOP X5™ is a new way of cleaning that is effective and far more hygienic than conventional methods. The H2O MOP X5™ achieves a high degree of hygiene and increases cleansing power by converting water to steam using a microfiber floor cloth to enhance absorbency.
ACCESSORIES ................7 Problem Possible Cause Solution HOW TO ASSEMBLE THE H2O MOP X5™ UNIT ......8 - 10 THE UNIT DOES NOT The unit is not plugged in Make sure the unit is HOW TO USE THE H2O MOP X5™ UNIT ........11 - 16...
At all times during use, always make sure to keep body parts clear 6. Do not allow the H2O MOP X5™ to be used as a toy. Young children should of the Safety Pressure Release Valve to avoid being burned by hot steam or water in the event of discharge.
Page 5
2) Use the Cleaning Pin to remove scale deposits from the small hole of the steam 10. Do not use with damaged cord or plug. If the H2O MOP X5™ is not working outlet in the Main Body, as illustrated in Fig. 2.
27. Do not expose to rain. 28. Stop using the H2O MOP X5™ if you observe water leakage, and contact a How to decalcify the Water Tank interior: qualified technician.
5) Wrap Power Cord around Upper and Lower Cord Wrap. Extension Handle Lock Button Power Switch ( O / I ) with LED ON/OFF Light 6) Wipe all surfaces of the H2O MOP X5™ with a soft cloth. Store in a protected, Steam Regulator dry area.
Thane Direct and its affiliated companies assume no liability for personal injury or property damage resulting from the misuse of the H2O MOP X5™, including the failure to comply with the instructions contained in this User Guide or provided by...
Power Switch ( O / I ) is in the “OFF” ( O ) position before LINT CLOTH assembling the unit or changing the accessories. Make sure that the H2O MOP X5™ is unplugged. 1) Attach the Mop Head to the Main Body 1) Fill the Water Tank with water. Please refer to as follows: Insert the Swivel Joint into the “HOW TO USE THE H2O Mop X5™”...
Page 10
USER’S GUIDE 3) Insert the Curved Handle into the DUSTER Make sure that the H2O MOP X5™ is unplugged. designated opening of the Extension Handle until it gets locked in place 1) Fill the Water Tank with water. Please refer to with the Curved Handle Lock Button.
Page 11
Microfiber Cloth in place, on top of the carpet glider as illustrated in Fig. 6a. Do not Do not touch the Garment Steamer Tool/Cloth during usage, as these attempt to use the H2O MOP X5™ unit components can get extremely hot. on carpet/rug surfaces without the carpet Keep the Extension Hose away from your body and avoid touching the hose as it can get hot.
Page 12
MOP X5™” section in this manual Test the H2O MOP X5™ on a small isolated area of your flooring prior to overall use 2) Install the Garment Steamer Cloth onto the Window Cleaning/Garment on any floor surface.
WINDOW CLEANING TOOL SAFETY PRESSURE RELEASE VALVE Make sure the H2O MOP X5™ is unplugged. The Safety Pressure Release Valve is designed to relieve pressure inside the water heater by discharging hot steam or water through the Safety Pressure Release 1) Fill the Water Tank with water.
Page 14
Thane Direct and its affiliated companies assume no liability for personal injury or property damage resulting from the misuse of the H2O MOP X5™, including the failure to comply with the instructions contained in this User Guide or provided by...
Page 15
To avoid streaks and puddles select the appropriate setting for which you and filled with water, plug in the Power will be using the H2O MOP X5™. For less steam use setting 1 and 2, for Cord into a grounded electrical outlet.
Page 16
Align the lock button on the 5) When the H2O MOP X5™ stops emitting steam, simply turn OFF and unplug Extension Hose the appliance, refill the Water Tank and continue cleaning. with the designated...
(Optional Item) and continue use. Select low steam regulator position. 3) To sanitize an area of your floor, leave the H2O MOP X5™ as illustrated in Fig. 1a, 1b & 1c. Make sure that the Extension Hose is at high steam setting over the steam area for about 10 seconds, securely locked into place before usage.
Page 18
HOW TO ASSEMBLE HAND-HELD STEAMER CAUTION Make sure that the Jet Nozzle is securely locked Make sure that the H2O MOP X5™ in place before usage. is unplugged before assembly. 1) Remove the Power Supply Cord from 5) Attach either the round nylon brush or round copper brush by screwing onto...
Page 19
Distributed and Marketed by : TV PRODUCTS INDIA PVT. LTD. CUSTOMER CARE: 022- 6128 9090/91 www.televantage.in H2OMOPX5 ENG DONLIM R2 120809 MADE IN CHINA...