Grease Points - ASV POSI-TRACK SR-70 Operation And Maintenance Manual

Grease Fitting Locations
A. Lower Bucket Cylinder Pivot
B. Upper Bucket Cylinder Pivot
C. Front Lift Cylinder Pivot
D. Lift Arm Pivot
E. Rear Lift Cylinder Pivot
F. Rear Axle Pivot (2)
G. Front Axle Pivot (2)
H. Lower Bucket Pivot

Grease Points

The SR 70/80 are equipped with grease fittings at pivot points
throughout the machine. The illustration above shows the locations
of all fittings on the left side of the machine. An identical fitting exists
on the right side of the machine for each one identified in the illus-
tration. Lubricate all fittings DAILY or after every 10 hours of opera-
tion to maximize component life and ensure proper machine func-
tion.
C
B
A
H
G
38
MAINTENANCE
Grease Points
D
E
F