Table of Contents
Advertisement
POWERING MAIN UNIT ON AND OFF
Turning on the power switches
1. Turn on the power switches on the peripheral equip-
ment first. If using an external hard disk unit, turn on
the power switch on the hard disk unit.
The power indicator of the hard disk box lights red.
2. Turn on the power switch on the computer.
Windows NT starts up.
Turning off the power switches
Note: Before turning off the power, be certain to first
quit any application programs and Windows NT
according to the procedures described on the
following page. If the power switch for a hard
disk drive is turned off while the hard disk drive
is being accessed, data on the hard disk drive
could be lost and the hard disk drive itself could
be damaged.
Note: When using an external hard disk unit, do not
move the unit for at least 30 seconds after turn-
ing off the power for the hard disk unit. The
motor in the hard disk unit may still rotate for up
to 30 seconds after the power is turned off; if the
hard disk unit is moved while the motor is still
rotating, data on the hard disk drive could be
lost and the hard disk drive itself could be dam-
aged.
1. Quit all application programs and Windows NT.
2. Once the message, "It is now safe to turn off your
computer" appears, turn off the computer power
switch.
3. Turn off the power switches on the peripheral equip-
ment. If using an external hard disk unit, turn off the
power switch on the hard disk unit.
38
Advertisement
Table of Contents
