Electrolux 30” GAS FREESTANDING RANGES Service Update Manual page 32

Remove the ¼" hex screws that secure the
Guide Rail Screw
drawer guide rail and element base pan on each
side of the drawer opening.
Drawer Guide Rail
Remove the drawer guide rail and drawer shield
together by pulling straight forward.
Drawer Side Shield
Base Pan Screw
Once both of the drawer guide rails and side
shields have been removed the base pan and el-
ement assembly can be pulled forward to remove
from the range. See photo at right.
Pull Forward
With the element and base pan assembly re-
Mounting Screws and Clips
moved the element and thermostat are accessible
for servicing. To dismount the element from the
pan remove the screws and clips that secure it to
the pan. Also remove the screw that secures the
thermostat mounting bracket.
Warmer Drawer Element and
Base Pan Assy
When reinstalling the thermostat mounting
bracket always insure that the element terminal
shield is installed and properly positioned.
Terminal Shield
P/N 316439221
Page 32