Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for VM Audio VAS12SUB
Summary of Contents for VM Audio VAS12SUB
- Page 1 VAS12SUB / VAS15SUB VAS18SUB SHAKER SUBWOOFER SYSTEMS...
-
Page 2: Table Of Contents
Thank you for your interest in VM Audio products. Our goal is to enhance your listening experience. The Shaker Series was designed as the economical solution for a performance craving, casual consumer. The experts and engineers at VM Audio have meticulously tested and designed this product with a reasonable price tag to fit any budget. -
Page 3: Package Contents
1. Please read these intructions carefully before attempting received all the items included with your system. to install and operate this unit. VAS12SUB, VAS15SUB, VAS18SUB 2. Please read all instructions as indicated in the User Guide. 3. Keep this User Guide for future reference. - Page 4 Features Overview Features Overview Input Terminal Plate VAS12SUB, VAS15SUB, VAS18SUB Speakon Cable Connectors Input Terminal 1/4” TS Jack Connectors Rear Binding Posts Speakon Cable Connectors - Two connectors are 35 mm featured which are wired in parallel. Use one connector to...
-
Page 5: Getting Started
Getting Started Installation Subwoofer & Loudspeaker Placement Step 1 The Shaker DJ Series Subwoofers were designed to sit on Carefully run the speaker wires or cable from the amplifier a solid flat surface. up to the location of the subwoofer. •... -
Page 6: Installation
Installation Installation Step 2 - Speaker Wire Connections Option 2 (1/4” TS Jack Connection) If using 1/4” TS jack speaker cable(s), plug the jack into WARNING! one of the 1/4” jack connectors. To prevent electrical shock hazard, always switch off the amplifier when making connections to the subwoofer. -
Page 7: Making Your Own Connectors
Making Your Own Connectors Making Your Own Connectors 1/4” TS Jack Connectors Speakon Connectors 1. Strip off 1/2 inch of insulation from the ends of each 1. Strip off 1/2 inch of insulation from the ends of each speaker wire to expose the two conductors, and tightly speaker wire to expose the two conductors, and tightly twist the wire strands. -
Page 8: Tips
Tips Subwoofer Configurations Subwoofer Power Requirements Single Subwoofer Operation The following guidelines will assist you in selecting the appropriate amplifier for your subwoofer(s) to maintain a safe level of operation. • For clear, high quality performances where distortion CH 1 & CH 2 should be at its minimum, the subwoofer(s) should be Bridged powered with an amplifier capable of delivering twice its... -
Page 9: Subwoofer Configurations
Parallel Subwoofer Connections Subwoofer Configurations Single Loudspeaker & Subwoofer Operation 1/4” TS Jack Plug Input CH 1 Output Input Subwoofer 1 Subwoofer 2 CH 2 Speakon Quick-Connect Stereo with Subwoofer Operation Input CH 1 CH 2 Bridge Mono Operation Output Input Subwoofer 1 Subwoofer 2... -
Page 10: Troubleshooting
Troubleshooting Parallel Subwoofer Connections No audio when subwoofer is connected • Make sure the mute is off. • Ensure volume and all gain controls in your system are turned up. • Check if speaker wire connections have been interrupted and make sure they have a solid connection to the speaker terminals on the amplifier and enclosure. -
Page 11: Specifications
Specifications Specifications VAS12SUB VAS18SUB Loudspeaker Type Low Frequency Transducer Loudspeaker Type Low Frequency Transducer Low Frequency Driver 12” High Output Subwoofer Low Frequency Driver 18” High Output Subwoofer Frequency Response 35 Hz - 300 Hz Frequency Response 35 Hz - 300 Hz... -
Page 12: Limited Warranty Agreement
Limited Warranty Agreement Limited Warranty Agreement Your product is covered by a limited warranty by VM Audio as Include a copy of the original receipt or invoice with the established below: purchase date, dealer’s name, customer’s name and invoice number clearly visible. Manufacturing date may be used if no Electronics Limited Warranty proof of purchase is provided.
Need help?
Do you have a question about the VAS12SUB and is the answer not in the manual?
Questions and answers