Do you have a question about the X60 and is the answer not in the manual?
Questions and answers
Summary of Contents for Tobii X60
Page 1
User Guide ® Tobii Technology Tobii X60/X120 Monitor Mount Revision 1 www.tobii.com...
Page 2
Only use monitor arms recommended by Tobii! As mounting the X60/X120 Monitor Mount and the eye tracker on a monitor arm will subject the arm to weight distributions it is not originally contstructed for, non-Tobii recommended arms might break or not be able to hold the X60/X120 Monitor Mount, eye tracker and monitor in place.
User Guide release 1.0, November 2010 Tobii Technology AB reserves the right to change the content of this user guide without prior notice. Changes due to typographical errors, innacuracies or modifications in programs and/or equipment may be implemented at any time.
Product description Intended use The Tobii X60/X120 Monitor Mount is used in test situations where the stimuli is shown on a monitor and an X60 or an X120 Tobii Eye Tracker will be used. The X60/X120 Monitor Mount provides a fixed geometry for the eye tracker and monitor.
Tobii X60/X120 Monitor Mount Recommended monitor size The X60/X120 Monitor Mount is constructed for monitors between 17’’ and 23.5’’ , i.e. with a diagonal between 43.2 and 59.7 cm. The shape of the area in which maximum precision and accuracy can be achieved is illustrated below.
User Guide Assembly instructions Before mounting the arm, ensure that the table or wall you are mounting it on is sturdy enough to support the asymetrical weight distribution caused by the monitor and the eye tracker. If a table, which is not fit for the purpose is used, there is a risk that the table will tip over when the monitor and the eye tracker are attached or adjusted.
® put between the monitor and the monitor regulator as a spacer (see image 6b. to the left). The X60/X120 Monitor Mount is delivered with two different lengths of screws that can be used to fasten the VESA ®...
Page 9
Enter the values into the X Configuration tool Measure all the values required and enter these into the X Configuration tool. More information about how to enter the values can be found in the X60 or X120 Eye Tracker user manual.
Need help?
Do you have a question about the X60 and is the answer not in the manual?
Questions and answers