Summary of Contents for Crane Infrared smartHEATER EE-8077W
Page 1
Infrared smartHEATER MODEL # EE-8077W If you have any questions about the operation of your infrared heater, please contact Crane Customer Care. Toll Free: 888-599-0992 Email: questions@crane-usa.com 24/7 Chat: www.crane-usa.com or with the FREE Crane App PLEASE READ AND SAVE ALL INSTRUCTIONS TO ENSURE...
List of Main Parts P. 4 Technical Specifications P. 4 Assembly, Operation and Use P. 4-5 Heater Settings P. 6 Wi-Fi Setup P. 7 Maintenance P. 8 Customer Care P. 9 Warranty P. 10 For information about all CRANE products, please visit http://www.crane-usa.com.
IMPORTANT SAFETY INSTRUCTIONS Always follow basic safety precautions when using electrical products, especially when children are present. WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, ALWAYS MAKE SURE THE PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE OUTLET SLOT AND FULLY INSERT.
GENERAL SAFETY INSTRUCTIONS WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire or serious personal injury. The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
WARNING: Do NOT use this infrared heater if any part has been under water. Immediately contact Crane Customer Care or a qualified electrician to inspect or replace the heater if necessary. Keep plastic wrapping away from children.
2. Ensure that the heater’s power switch (on the back of the unit) is switched to Power Off. 3. Plug the heater into a 120VAC outlet. This heater has a polarized plug. As a safety feature to reduce the risk of electrical shock, this plug is intended to fit in a wall outlet in one way.
HEATER SETTINGS Icon Function Desired Room Temperature Setting: While this icon is illuminated, use the arrow buttons to set the Desired Room Temperature. Press and hold the Up arrow to switch to C. The temperature range is from 45 F – 85 F or 7 C – 30 C . Heat Power Setting: While this icon is illuminated, use the arrow buttons to select the LO (750 W) or HI (1500 W) Heat Power Setting.
On your phone, go to Wi-Fi Settings and select the “CRANEwifi” network. Return to the Crane App and enter all information prompted on the Orange Setup Screen, then press SAVE AND RESTART when finished. This will restart the Crane Device.
MAINTENANCE CAUTION: Always be sure that the heater is switched OFF, unplugged and completely cooled before cleaning or attempting to store the item. Do not immerse heater in water or allow water to drip into the interior of the heater, as this could create an electric shock hazard.
LIMITED WARRANTY Thank you for purchasing a Crane product. This Infrared Heater was tested and meets our stringent quality standards. This product is warrantied to be free from manufacturing defects under normal use and conditions for 1 year. PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE. CONTACT US FOR PROBLEMS AND QUESTIONS.
Need help?
Do you have a question about the Infrared smartHEATER EE-8077W and is the answer not in the manual?
Questions and answers