Table of Contents
Advertisement
CONVENIENCEFUNCTIONS
ChangingthePINcode
You can also enter a personal PIN code instead
of the default code »1234«. Please take note of
your own PIN code.
1 Select »Set PIN« with »
»●« to confirm.
2 Enter the current PIN code 1 2 3 4 with
»1...0«.
3 Enter your new four digit PIN code with
»1...0«.
4 Enter your new four digit PIN code with
»1...0« again.
5 Press »i« to end the setting.
Lockingtelevisionchannels
You can lock individual television channels, for
example channels unsuitable for children, using
a personal PIN code.
1 Open the menu with »i«.
2 Select the »SOURCE SETUP« menu with »
or »
« and press »●« to confirm.
Λ
3 Select the line »Program Table« with »
»
« and press »●« to confirm.
Λ
– T he »PROGRAM TABLE« menu is dis-
played.
4 In the »PROGRAM TABLE« menu, switch
over to the list view with »
5 Select the channel to be locked with »
or »
«.
Λ
6 Select the column »Lock« with »
and press »●« to lock the channel.
7 Enter the PIN code »1234« with »1...0«.
– The channel is marked using »✔«.
Note:
To remove the lock, select the channel again
7
with »
« or »
V
Λ
and then enter the PIN code 1 2 3 4 using
»1...0«.
8 Press »i« to end the setting.
« or »
« and press
V
Λ
V
« (yellow).
<
« or »
«, press »●« to confirm
------------------------------------------------------------------------
Updatingsoftware
(for digital channels only)
1 In the »SETTINGS« menu, select the line
»Check For Updates updates« with »
»
« and press »●« to confirm.
Λ
– A search for new software will be made
and – if available – it will be installed.
Note:
If a search for software updates should be
7
made automatically, select the line »Auto-
matic OAD« with »
>
or »
« to select the option »On«.
– T he software will be updated automati-
cally as far as possible.
2 Press »i« to end the setting.
Restoringthetelevisiontothe
defaultsettings
This function allows you to delete the channel
lists and all custom settings.
«
V
1 In the »SETTINGS« menu, select the line
» Restore Factory Defaults« with »
« or
and press »●« to confirm.
2 Press »
message.
– T he »Source Setup« menu appears.
3 Continue the settings with the chapter " Initial
set-up and tuning television channels" on
«
page 14.
V
>
«
« or »
« and use »
V
Λ
« (green) to confirm the warning
ENGLISH
« or
V
<
«
« or »
«
V
Λ
4 1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VLE 7131 BF and is the answer not in the manual?
Questions and answers
телевизор не находит цифровые каналы
The Grundig VLE 7131 BF TV may not be finding digital channels due to one or more of the following reasons:
1. The antenna cable is not connected properly to the "ANT-IN" socket.
2. The source is not set correctly; it should be set to "Air" or "Cable" depending on the signal type.
3. The automatic channel search was not completed or was aborted.
4. The TV is not receiving a strong enough signal; the antenna or its position may need adjustment.
5. The TV may not be compatible with certain future digital standards, though it supports current DVB-T and DVB-C standards.
To resolve the issue, check the antenna connection, ensure the correct source is selected, and run the automatic channel search to scan for available digital channels.
This answer is automatically generated
как подключить Grundig VLE 7131 BF кцифровой причтавке
To connect the Grundig VLE 7131 BF to a digital set-top box:
1. Connect the antenna or cable input to the set-top box.
2. Use an HDMI cable or SCART cable (depending on the set-top box output) to connect the set-top box to the TV.
3. Plug the TV’s power cord into a wall socket using the supplied cord.
4. Switch on the TV and select the correct input source (e.g., HDMI or AV) using the TV remote control.
Ensure all connections are secure before turning on the devices.
This answer is automatically generated
куда в телевизоре подключить желтый штеккер кабеля Скарт
Connect the yellow plug of the SCART (EURO/AV) cable to the »AV1/S-VHS« socket on the Grundig VLE 7131 BF TV.
This answer is automatically generated