Wind Dehydration Process - Hitachi AJ-S55GZ User Manual

WIND DEHYDRATION Process

Clothes not suitable for this mode.
• Clothes that cannot be washed in SILK process
31
• Clothes of easily-fade away colors
Put the laundry in and press the "POWER
SWITCH" button
Press the "PROGRAM" button
"WIND DEHYDRATION" process.
• With each pressing on the "PROGRAM" button, the
indicator will light or flash in sequence.
• When the "NORMAL" LED light at the same time
"WIND DEH" LED flash, it indicates for "WIND DEHY-
DRATION" process.
Press the "START" button
Put in the detergent according to amount and close
the lid
(The sound of buzzer indicates washing
completion)
(
Example: Run "Wind Dehydration" process for 1.5kg clothes, the drying time of the clothes will be reduced by about 30%.
1.5kg
• Quilt and blanket
• Clothes with
31
.
and select
.
)
3
Cleaning and pre-drying finish at one step
sign in washing mark
• The pulsator to detect the amount of laundry and display
on the control panel. 19
• After the detergent amount and the water level are
displayed, the washing machine will pause about 1 minute
for putting in the detergent.
(Press the "WATER LEVEL" button, and the washing
machine starts operation)
1
• After the lid is closed, the washing machine will detect at
the low water level and the required water level in order to
dissolve the detergent and know about the quality of
laundry, then it will decide the necessary mode of washing.
Use of detergent Powder synthetic detergent
Liquid detergent
• How to put detergent in 20~21
20~21
• During wind dehydration, the "SPIN" LED flashes in
turn, indicating that it is operating wind dehydration.
• Shoes
• Easily distorted clothes
19
45