Download Print this page

Care And Maintenance; Technical Specification - Sealey CR01 Instructions For Use

Am/fm alarm clock radio

Advertisement

4.
SETTING THE TIME
4.1
Move the function switch to OFF and plug the mains power cable into the household socket. '12:00' will flash in the display.
4.2
Press and hold the TIME button and at the same time press the HOUR button until the correct hour is displayed. If setting
the time in the afternoon and evening, cycle through the hours until the correct hour is displayed and the pm indicator
is illuminated.
4.3
After setting the hour, press the MIN button until the correct minute is displayed.
4.4
Once the time has been set, release the TIME button.
5.
USING THE RADIO
5.1
Plug the mains power cable into the household socket and switch on.
5.2
Slide the FUNCTION switch to the 'ON' position.
5.3
Select the waveband by sliding the BAND switch to the desired waveband (AM or FM).
5.4
Turn the TUNING knob to select the station of choice. The radio frequency scale will show the wavelength selected.
5.5
Adjust the volume to the desired level by rotating the VOLUME control knob.
5.6
To turn off the radio, slide the FUNCTION switch to 'OFF'.
Note! The built in AM and the external FM antennas are directional. If tuning into an FM station extend or move the antenna for a
better reception. If tuning into an AM station rotate the whole unit after tuning to obtain the best reception.
6.
SETTING AND USING THE ALARM
6.1
Press and hold the ALARM button and at the same time press the HOUR button repeatedly until the correct alarm hour is
displayed.
6.2
After setting the hour, press the MIN button repeatedly until the correct alarm minute is displayed.
6.3
Once the time has been set, release the ALARM button.
6.4
To activate the alarm, slide the FUNCTION switch to the position marked 'BUZZ' to wake up to a buzzer or 'AUTO' to wake
up to the radio.
6.5
Once the alarm has been activated, the AUTO indicator will illuminate in the display.
6.6
When the time on the clock is the same as the alarm time that has been set, the alarm will sound.
6.7
The alarm will continue to sound and stop automatically after 1 hour 59 minutes. To silence the alarm, press the ALARM
button. The alarm indicator will remain illuminated and the alarm will sound again the same time the following day unless
the FUNCTION switch is moved to 'OFF'.
6.8
To activate the snooze function, press the SNOOZE button when the alarm sounds. The alarm will silence and the alarm will
sound again after approximately nine minutes.
6.9
To turn off the alarm permanently, slide the FUNCTION switch to the 'OFF' position.
Note! The snooze button can be used repeatedly in the 1 hour 59 minute interval after the set alarm time.
7.
SETTING AND USING THE SLEEP FUNCTION
This function will switch off the unit automatically after a preset time interval up to 59 minutes.
7.1
Move the FUNCTION switch to 'OFF', 'BUZZ' or 'AUTO' position.
7.2
Press and hold the SLEEP button, the radio will start to play and '0:59' will be shown in the display. Release the button and
the display will show the clock and the radio will switch off after 59 minutes.
7.3
To set a shorter time interval, press and hold the SLEEP button and at the same time press the MIN button until the desired
switch off time interval is displayed.
7.4
The unit will switch off after the time interval selected has lapsed.
7.5
To turn off the sleep function, press the SNOOZE button and the radio will stop immediately
Note! If the function switch is moved to 'BUZZ' or 'AUTO' the alarm is also activated. Before setting the sleep interval, ensure the
alarm is set to the desired wake up time.
8.

CARE AND MAINTENANCE

Wipe external surfaces with a soft cloth. If the cabinet is very dirty, unplug from the mains supply and use a damp cloth
soaked in a weak solution of washing up liquid and water. Allow to dry thoroughly before reusing.
Should it become necessary to replace the fuse in the plug, please replace with a 3A fuse that conforms with BS 1362.
9.

TECHNICAL SPECIFICATION

Rated voltage . . . . . . . . . . . . . . . . . . . . 230 - 240V~ 50Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . 6W
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . .AM 530-1600kHz
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM 88-108MHz
Operating conditions . . . . . . . . Temperature: 5°C to 35°C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Humidity 5% to 90%
Operating position . . . . . . . . . . . . . . . . . . . . . . .Horizontal
Rating Information: At the bottom of the unit.
.
CR01
Issue No: 1 - 24/06/09

Advertisement

loading