Troubleshooting - Kenmore 625.381560 Owner's Manual

Problem: Water leaking from faucet airgap hole.
Cause: Drain side of faucet airgap (3/8" black tub-
ing) plugged, restricted or incorrectly con-
nected to drain point.
Problem: Faucet LED indicator light does not function after battery change.
Cause: Battery dead.
Cause: Battery installed incorrectly.
Problem: Water leaks at push connect fittings
Cause: Tubing not cut square.
Cause: Tubing not pushed in all the way.
Cause: Tubing nicked.
Cause: Outer tubing surface finish not smooth. Correction:
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com

Troubleshooting

Correction: Inspect and eliminate restriction or plug. Refer to installation
instructions for proper drain connection. See page 9.
Correction: Replace with new battery. See page 21.
Correction: Install battery correctly. See pages 13 or 21.
Correction: Cut tubing square. See page 14.
Correction: Push tubing in all the way. See page 14.
Correction: Remove tube from connection. Remove nicked portion by cutting
tube to shorter length. Re-insert in connection. See page 14.
Remove tube from connection. Remove problem area by cutting
tube to shorter length. Re-insert in connection. See page 14.
25