Table of Contents
Advertisement
Available languages
Available languages
Drain & Spin
An extra drain and spin may help shorten drying times for some
heavy fabrics or special-care
items. Drain & Spin may also be
used for draining the washer after canceling a cycle or
completing a cycle after a power failure.
To use Drain & Spin setting:
1. Press RINSE/DRAIN & SPIN button once. The Rinse & Spin
indicator light, along with the Spin Speed, Water Temperature
and 2nd Rinse lights will glow. You may change the Spin
Speed modifier only.
2. Press 2nd RINSE to deselect Rinse & Spin. The 2nd Rinse
and Water Temperature lights will shut off to indicate that a
Drain & Spin cycle has been selected.
NOTE: A Drain & Spin time of approximately
14 minutes will
appear in the Estimated Time Remaining display.
3. Press START.
IMPORTANT: Water will dispense in the washer for a
moment, the lid will unlock, lock again, and then the Drain &
Spin cycle will continue. This is normal.
Clean Washer
Use the Clean Washer cycle once a month to keep the inside of
your washer fresh and clean. This cycle uses a higher water level
in combination
with liquid chlorine bleach to thoroughly clean the
inside of your washing machine. See "Cleaning Your Washer."
©
Clean Washer
USE BLEACH ONLY
IMPORTANT:
Do not add detergent to this cleaning cycle. Use
only liquid chlorine bleach. Do not place garments or other items
in the washer during the Clean Washer cycle. Use this cycle with
an empty wash tub.
Modifiers allow you to further customize your cycles and save
energy.
Soil Level (Wash Time)
Soil level is preset for each cycle. See "Preset Cycle Settings" in
"Cycles." As you press the Soil Level pad, the cycle time
(minutes) will increase or decrease in the Estimated Time
Remaining display. To get the minimum wash time, press the pad
until the indicator light next to Light illuminates. This is the
shortest wash time available for that cycle.
He_W
MedHeavy
Normal
MedLight
Lght
Soil
Levd
A)JUSrS
WAqH lIME
•
For most loads, use the time recommended
in the preset
cycle settings.
•
For heavy soil and sturdy fabrics, press Soil Level to select
more wash time, if needed.
•
For light soil and delicate fabrics, press Soil Level to select
less wash time, if needed.
Spin Speed
This washer automatically
selects the spin speed based on the
cycle selected. The preset speeds can be set at a higher or lower
spin speed to match the clothes load. Spin speeds may vary by
cycle.
High
Medium
Low
NoSpin
Spin
Speed
Wash/Rinse
Temp
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
Warm rinses leave the loads drier and more comfortable
to
handle. However, warm rinses may increase wrinkling. Cold
rinses may help with wrinkling and save energy.
Auto emil Contro_
Hot/ Cold
Cold/ Cold
Wash / Rnse
Temp
17
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the OASIS HT W10026626B and is the answer not in the manual?
Questions and answers
It keeps saying it’s unbalanced with every load. It won’t drain at the last cycle
To fix the unbalanced load and draining issue with your Kenmore Oasis HT W10026626B washer:
1. Redistribute the Load – Open the lid and evenly distribute the clothes in the basket. Make sure the height of the load does not exceed the top row of basket holes.
2. Reduce Load Size – If the load is too large, remove some items to allow better movement during the spin cycle.
3. Check for Proper Sorting – Avoid mixing heavy and light fabrics, as this can cause imbalance.
4. Ensure Proper Spin Speed – Select a higher spin speed if needed.
5. Inspect the Drain Hose – Ensure the drain hose is not kinked or clogged, which can affect draining.
6. Verify Water Inlet Hoses – Ensure hot and cold hoses are connected correctly. If reversed, the washer may display an "HC" error code.
If these steps do not resolve the issue, consult the washer’s troubleshooting guide or seek professional service.
This answer is automatically generated