Removing A Test Strip From The Cartridge - LabStyle Dario User Manual

Chapter 3 - Checking Your Dario™ Glucose Meter
Checking Your Glucose Meter With Dario™ Control solutions
Do not plug the Dario™ meter into any device other than a compatible
smart mobile device audio socket. The list of compatible smart
mobile devices is provided in
Specifications

removing a Test strip From the Cartridge

You should have a test strip cartridge already inserted in your Dario™ housing. If
this is not the case, please go to
™ To remove a test strip from the cartridge:
1. Remove the Cartridge Cover of the Dario™ housing by pushing it outwards until
it comes off (use the removal indication lines).
2. Snap open the case by pushing up the edge.
3. Remove a test strip from the cartridge.
21
Chapter 7 – Technical Information &
Inserting the Test Strip Cartridge on page 10.