Power Ratings: The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of
Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower
values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient
operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and
the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power
when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a variety of factors
including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to
manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.
* This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association (PWMA) standard PW101
(Testing and Rating Performance of Pressure Washers).
26
Pressure Washer
Product Specifications
Outlet Pressure . . . . . . . . . . . . . .2,700 PSI (186.1 BARS)*
Flow Rate . . . . . . . . . . . . . . . . . . . .2.3 GPM (8.7 liters/min)
Water Supply Temperature . . . . . . . . . . .100ºF (38ºC) MAX
Displacement . . . . . . . . . . . . . . . . . . .11.58 cu. in. (190 cc)
Spark Plug Gap . . . . . . . . . . . . . . . . . . .0.020 in. (0.50 mm)
Fuel Capacity . . . . . . . . . . . . . . . . . . . . . .1.6 Qt. (1.5 Liters)
Oil Capacity . . . . . . . . . . . . . . . . . . . .20 Ounces (0.6 Liters)
Common Service Parts
PumpSaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6039
O-Ring Maintenance Kit . . . . . . . . . . . . . . . . . . . . . . . .6048
Water Inlet Screen . . . . . . . . . . . . . . . . . . . . . . . . .B2384GS
Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . .795066 or 5419
Spark Plug . . . . . . . . . . . . . . . . . . . . . . . . . .692051 or 5066
Engine Oil Bottle . . . . . . . . . . . . . . . . . . .100005 or 100028
Fuel Stabilizer . . . . . . . . . . . . . . . . . . . . . . .100002 or 5041
Spark Arrester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .690813
Briggs & Stratton Power Products Group, LLC
P.O. Box 702
Milwaukee, Wisconsin, 53201-0702 U.S.A.
(888) 611-6708
www.troybilt.com
Need help?
Do you have a question about the 2,700 PSI and is the answer not in the manual?
Questions and answers
correct method to rebuild a pressure pump for a Troybilt pump
The correct method to rebuild a 2,700 PSI Troy-Bilt pressure pump is not provided in the context. The document includes troubleshooting steps and safety warnings but does not contain instructions for rebuilding the pump.
This answer is automatically generated
Water will not come out
Water may not be coming out of the Troy-Bilt 2,700 PSI pressure washer due to one or more of the following reasons:
1. Water inlet is blocked — clean the inlet.
2. Inadequate water supply — ensure proper water flow.
3. Inlet hose is bent or leaking — straighten or patch the hose.
4. Inlet hose strainer is clogged — clean the strainer.
5. Water supply temperature is above 38°C (100°F) — use cooler water.
6. High-pressure hose is blocked or leaking — remove obstructions or fix leaks.
7. Spray gun is leaking — replace the gun.
8. Spray tip is clogged — clean the tip.
9. Pump is defective — contact authorized service.
Check each of these to identify and fix the issue.
This answer is automatically generated
I have a fuel leak coming from behind the green filter located under the on/off switch.