Multicode Mode; Multicode Expression - Motorola DS4208 Product Reference Manual

Multicode Mode

Parameter # F1h A5h
Enable this parameter to allow multiple bar codes to decode upon one trigger event based on the programmed
multicode expression. The digital scanner reports a successful decode and provides user indication only if it
decodes all bar codes indicated by the multicode expression, otherwise the decode fails. Bar codes are transmitted
in the order defined in the multicode expression. Disable this to operate in normal decode mode.
NOTES Enabling Multicode Mode disables
Multicode does not operate in presentation mode.
Do not use Multicode Mode if
When using this mode, always orient the digital scanner at the same distance and angle (perpendicular).
*
Disable Multicode Mode
(00h)

Multicode Expression

Parameter # F1h 95h
Use this feature to program a multicode expression for
indicates any bar code.
To set the multicode expression:
Scan the bar code below.
1.
Scan bar codes from the alphanumeric keyboard in the Advanced Data Formatting Programmer Guide to
2.
define the expression.
Scan the
3. End of Message
Multicode Expression
User Preferences & Miscellaneous Digital Scanner Options 4 - 25
Picklist
Continuous Bar Code Read
Multicode Mode
bar code from the Advanced Data Formatting Programmer Guide.
Mode.
is enabled.
Enable Multicode Mode
(01h)
(grid method). The default is 1, which