Using The Resync Url; Using The Reboot Url - Cisco Small Business Pro SPA9000 Administration Manual

Advanced Topics in SPA9000 Administration
Remote Provisioning Features
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
spa.bin is assumed, as in the following example: http://192.168.2.217/
admin/upgrade?tftp://192.168.2.251/spa.bin

Using the Resync URL

The can be configured to automatically resynchronize its internal
SPA9000
configuration state to a remote profile periodically and on power up. The
automatic resyncs are controlled by configuring the desired profile URL into the
device.
The SPA resynchronizes only when it is idle.
NOTE
SYNTAX:
http://spa-ip-addr/admin/resync?[[protocol://][server-
name[:port]]/profile-pathname]
EXAMPLE: http://192.168.2.217/admin/resync?tftp://
192.168.2.251/spaconf.cfg
•
If no parameter follows /resync?, the Profile Rule setting from the Provisioning
page is used.
•
If no protocol is specified, TFTP is assumed. If no server-name is specified, the
host that requests the URL is used as
•
If no port is specified, the default port is used (69 for TFTP, 80 for HTTP, and
443 for HTTPS).
•
The profile-path is the path to the new profile with which to resync.

Using the Reboot URL

You can use the Reboot URL to reboot the
The reboots only when it is idle.
NOTE SPA9000
SYNTAX: http://spa-ip-addr/admin/reboot
EXAMPLE: http://192.168.2.217/admin/reboot
manuals search engine
server-name .
.
SPA9000
A
190