Advertisement
Available languages
Available languages
Check motor safety filter frequently
and
change
when dirty.
' lect WARNING
rical Shock Hazard
Unplug power cord from electrical
outlet. Do not operate the cleaner
without the motor safety filter. Be
sure the filter is dry and properly
installed to prevent motor failure
and/or electdcal shock.
Remove the dust bag as outlined in the
DUST BAG CHANGING section.
MOTOR SAFETY FILTER
ELECTROSTATIC
1. This white & grey
filter must be
replaced
when dirty.
It should
be
Motor
Safety
replaced regularly
Filler
depending
on use
conditions.
The fil-
ter CANNOT
be
washed as it will
lose its dust trap-
ping ability.
NOTE: See PARTS AND FEATURES
for
motor safety filter number.
Motor
Safety
Filter
2. If the filter,
located
in the bot-
tom of the bag
cavity, is dirty,
remove
it by
pulling forward
out
from under the
ribs.
3.
Replace
the
filter, white side
up, by sliding
it
back into place
under the ribs in
the bag cavity.
Motor
Replace
the bag as outlined
in the DUST
BAG CHANGING
section.
WARNING
Do not operate
without
exhaust
filter.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty. It should be
replaced regularly depending on use
conditions. The filter CANNOT be
washed as it will lose its dust trapping
ability.
NOTE: See PARTS AND FEATURES for
the exhaust filter number.
Slide the
exhaust
filter
cover release
down.
Pull out
on exhaust
fil-
ter cover to
remove from
bag cover.
Exhaust
Filter
II
I
Cover Release_
Exhaust
_i
_
Filter _1!
cover/_
Bag
Exhaust
Remove
the
exhaust
filter car-
tridge from the
bag cover.
Replace the exhaust filter
cartridge,
carefully
posi-
tioning it so that it fits into
the bag cover. The grey
edge of the filter should
be facing away from the
operator. Push only on
filter cartridge frame, not
on filter itself.
Exhaust
Filter
Cover
Release--__,
Exhaust
I_
Filter
I
CoverF
Bag
Exhaust
Replace
the
exhaust
filter
cover and
secure the
latch by push-
ing it upward.
15
Advertisement
