Indicator Lights; Adjusting The Temperature; Super Freeze - Prestige PRT 225 FFZS Manuallines For Use

Upright freezer
Table of Contents

Advertisement

INSTALLATION
Attaching the handle to the door
The handle is shipped inside the baskets in your upright freezer. To fix it:
1. Remove the blanking caps from the door on the side which opens.
2. Secure the handle in place using the screws provided.
3. Cover the screw heads using the blanking caps provided with
the handle.
PRT 225 FFZS D4 V2.indd 3
USING YOUR UpRIGhT FREEzER
Switching on your upright freezer
1. As soon as the upright freezer is plugged into the mains, the green
display on the control panel will glow and after two minutes the
warning tone will come on.
2. Use the up and down buttons to set the desired temperature for the
inside of the upright freezer. The desired temperature will flash, then
beep, before returning to the current temperature.

Adjusting the temperature

To change the internal temperature of the upright freezer use the up
and down buttons on the control panel. The recommended operating
temperature for your upright freezer is -18ºC.
The upright freezer may not operate at the correct temperature if it is in
a particularly hot or cold room or if you open the upright freezer door
very often.

Super freeze

Up
Down
Super freeze
For use when freezing fresh food or when adding frozen products
just purchased.
When the Super freeze button is pressed the internal temperature will
drop to its lowest and the compressor will run continually for 26 hours.
After this time the freezer temperature will slowly rise to the original,
selected temperature.
The Super freeze function can be cancelled at any time during this period
by pressing the Super freeze button again.

Indicator Lights

Super freeze – green
This light shows when the Super freeze button has been pressed.
Freezer alarm - red
SUPeR FReeZeR
ALARM
INDICATOR
INDICATOR
This light shows when the internal temperature rises above -10ºC.
Alarm
The first time you start the upright freezer, the alarm indicator and
temperature display may flash as soon as it's plugged into the mains.
Please note that this is normal. Press the Super freeze button for five
seconds and the display will stop flashing but the red alarm light will
continue to flash until the internal temperature falls below -10ºC.
The upright freezer is provided with a high temperature alarm function.
If the internal temperature were to rise above -10ºC, after a power cut for
example, the alarm indicator and temperature display will flash. This is to
remind you to assess the condition of the food inside the freezer.
If you have not pressed the Super freeze button to reset the control, the
alarm indicator and the temperature display will continue to flash, even if
the internal temperature is below -10ºC.
3
27/2/08 12:50:42

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRT 225 FFZS and is the answer not in the manual?

Questions and answers

Table of Contents