Related Manuals for AUDAC WX802
Summary of Contents for AUDAC WX802
-
Page 1: User Manual
Wall Speaker WX802 AUDAC PROFESSIONAL AUDIO EQUIPMENT Wall Speaker WX802 User Manual & Installation Guide... - Page 2 Warning Only use the correct amplifier output voltage and impedance. Exceeding these limits could cause fire or other failures. Avoid explosions: do not use the speaker around gasoline, thinner or other combustibles. Only install the speaker in locations that can structurally support the weight of the speaker. Not doing so may result in the speaker falling down.
- Page 3 Mind the polarity markings when wiring the loudspeaker cables. Power settings On the rear side of the WX802 loudspeaker a recessed adjuster screw is provided. Using this adjuster screw the power / impedance of the loudspeaker can be set in 3 adjustable steps of impedance for 100V (60 Watt, 30 Watt, 15 Watt) and 1 step for 16 Ohm standard low impedance applications.
- Page 4 Additional information WX802 Technical specifications: RMS Power 70 W Max Power 140 W Nominal Impedance 8 Ohm Line transformer power tappings 165 Ohm / 60 W 330 Ohm / 30 W 660 Ohm / 15 W Sound pressure 1W / 1m...
Need help?
Do you have a question about the WX802 and is the answer not in the manual?
Questions and answers