Dehumidifier Setup And Use; Amount Of Water Collected - Meaco 12L Instruction Manual

DEHUMIDIFIER SETUP AND USE


Place the dehumidifier in an upright position on a stable, flat surface.

Please ensure the unit is a safe distance away from a wall or furniture.

Please keep clothes at a safe distance of 50cm away from the air inlet or outlet to prevent water from dripping
into the unit.

Ensure the tank is correctly fitted, if the tank is full or is not in place, the "Empty Tank"
the dehumidifier will turn off.

Press the Power button.

Select the relative humidity value that you want to use the dehumidifier in, for most applications this will be the
55%rh. For more detail refer to page six.

To turn off press the On/Off button again.

Amount of water collected


When you first use your dehumidifier it will work harder to reduce the room humidity down to your preferred
target (say 55%rh). This is the time when it will produce the most water and need emptying most frequently.
As the room becomes dryer the dehumidifier collects less water and takes longer to fill the tank, this is
perfectly normal. When the target relative humidity has been reached the dehumidifier will stop collecting
water, again this is normal.

If you find that you still have condensation on your windows or you need to dry the air further then use a lower
relative humidity setting (40 or 45%rh). This might well be necessary if you have single glazed windows or if
the outside air temperature drops towards freezing.

ATTENTION !

Never use the device with a damaged power cord, plug, cabinet or control panel. Never trap the power cord or
allow it to come into contact with sharp edges.

Failing to follow the instructions may lead to the guarantee becoming void.
10
light comes on and