Picture Menu - Hitachi CP-X200 CP-X300 Operating Manual

PICTURE Menu

PICTURE Menu
From the PICTURE menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press the
► cursor button or ENTER button to execute the item. Then
perform it according to the following table.
Item
BRIGHTNESS
CONTRAST
GAMMA
COLOR TEMP
COLOR
TINT
(continued on next page)
26
Using the ▲/▼ buttons adjusts the brightness.
Light  Dark
Using the ▲/▼ buttons adjusts the contrast.
Strong  Weak
Using the ▲/▼ buttons switches the gamma mode.
#1 DEFAULT #1 CUSTOM
#6 DEFAULT
#6 CUSTOM
#5 DEFAULT #5 CUSTOM
To adjust the "CUSTOM" modes, see "To adjust CUSTOM function
in GAMMA and COLOR TEMP" (28).
Using the ▲/▼ buttons switches the color temperature mode.
#1 HIGH DEFAULT
#6 Hi-BRIGHT-3 CUSTOM
#6 Hi-BRIGHT-3 DEFAULT
#5 Hi-BRIGHT-2 CUSTOM
#5 Hi-BRIGHT-2 DEFAULT
To adjust the "CUSTOM" modes, see "To adjust CUSTOM function
in GAMMA and COLOR TEMP" (28).
Using the ▲/▼ buttons adjusts the strength of whole color.
Strong  Weak
• This item can be selected only for a video signal, s-video or
component video signal.
Using the ▲/▼ buttons adjusts the tint.
Greenish  Reddish
• This item can be selected only for a video signal, s-video or
component video signal.
Description
#2 DEFAULT
#4 DEFAULT
#1 HIGH CUSTOM #2 MID DEFAULT
#3 LOW DEFAULT
#4 Hi-BRIGHT-1 CUSTOM
#2 CUSTOM
#3 DEFAULT
#3 CUSTOM
#4 CUSTOM
#2 MID CUSTOM
#3 LOW CUSTOM
#4 Hi-BRIGHT-1 DEFAULT