Nokia A032 Manual page 11

Name
(command line) Web page
zone_privacy Advanced
Access
Point
snmp_contact SNMP
snmp_sys_name SNMP
snmp_location SNMP
dhcp_mode DHCP
dhcp_base DHCP
dhcp_pool DHCP
dhcp_gateway DHCP
Access point parameters
Config
Factory default
"off"
"Contact"
"Sys Name"
"Location"
"disabled"
192.168.5.100
16
none
Valid range Description
"on" or "off" If set to "on", the AP
blocks traffic from
being passed directly
between radio clients
(this has the effect of
blocking peer-peer
networking)
up to 32 SNMP contact name
characters (from the RFC1213
MIB)
up to 32 SNMP system name
characters (from the RFC1213
MIB)
up to 64 SNMP location data
characters (from the RFC1213
MIB)
"off", Used to select DHCP
"disabled", operation for the AP.
"client", By default, this will
"server" be disabled, but
server and client
operation can be
selected.
IP address The base address of
the IP pool for DHCP
server operation.
1–64 The number of
entries in the pool for
the DHCP server.
IP address The gateway address
for DHCP clients.
11