Menu Button; Enter Button - Sharp HS-DM4062 User Manual

System Operate:
1. NTSC / PAL auto detect is the default. Please power on DVR after camera 1 install.
2. Please set HDD to Master on PCB if only one is installed.
3. Press PLAY to format if a new hard disk is detected.
Mouse Control
○
2
○
○
3
1
Operate:

MENU BUTTON

ESC / PTZ

ENTER BUTTON

DIRECTION BUTTON : MENU item select
+ BUTTON
- BUTTON
BACKUP
( ) MOVE (ENT) SELECT (MENU) EXIT
Screen display 1. Double-click of the left button on desired camera
○
1
2. Double-click of the left button on desired camera
Menu display 1. One-click of the right button to menu OSD
○
3
2. Back to last OSD page
None
No function
○
2
Select
1. One-click on the item of OSD
○
1
2. One-click on the value of item
3. One-click on the Exit to quit and save menu
4. From right-up to left-below and the set motion
: Press MENU button to enter menu setup or exit
: Press ESC button to exit menu / To PTZ control mode
: Press Enter button to confirm set or value change(+) / Shift mode
: Increase + values change
: Reduce - values change
: To backup mode
to full channel
to 9 split screen
detect area
8